Sell Ceramic saddle for chemical and petrochemical

详情

Ceramic saddle for chemical and petrochemical Ceramic Saddle is the opening packing with the structure of groove hemicycle, which reduce the cover between the packing and enlarge the space, therefore, the availability of the mass transfer surface will be enhanced efficiently, and it has favorable liquid distributing capability. Saddles are used in two main fields but have different properties depending on the application. One field is the chemical and petrochemical industries and another is in environmental areas such as RTO equipment. Introduction Ceramic Saddles are used in two main fields but have different properties depending on their application. The first field is the chemical and petrochemical industries and the second is in environmental areas such as RTO equipment. The first saddle is for chemical and petrochemical, the technical data as following: Chemical composition Index Value Specific gravity(g/cm3) 2.3 Water absorption(%) <0.3 Acid resistance(%) >*9.6 Max operating temp.(�) ***0 Porosity(%) <1 Moh�s hardness(scale) >6.5 Thermal conductivity(w/m.k) 0.**1.0 Specific heat(j/kg�) ******0 Technical data Spec. (inch) Sepc. (mm) W (mm) H (mm) L (mm) T (mm) Number per m³ Bulk density (Kg/m³) Free volume (%) Surface area (m²/m³) 1/4� 6 4.5 4.5 9 1.5 4, **0, **0 ***0 *4 ***0 3/8� *0 8 8 *6 2 1, **0, **0 **0 *3 **5 1/2� *2 *0 *0 *0 2.5 **0, **0 **0 *8 **7 5/8� *6 *2 *2 *4 2.5 **9, **0 **0 *1 **5 3/4� *9 *4 *4 *8 3 **6, **0 **0 *5 **0 1� *5 *1 *9 *8 4 *9, **0 **0 *5 **0 1.5� *8 *0 *0 *0 4.5 *9, **0 **0 *0 **0 2� *0 *0 *0 *0 5.5 8, **3 **0 *9 **0 3� *6 *7 *7 **4 9 2, **0 **0 *5 *1 Dimension Normal size Diameter of Deck (mm) Outside diameter (mm) Height (mm) Wall thickness (mm) Width (mm) 1/4� 6mm 6±2.0 9±2.0 4.5±2.0 1±0.5 4.5±2.0 3/8� *0mm *0±2.0 *6±2.0 8±2.0 1.5±0.5 8±2.0 1/2� *2mm *2±1.0 *0±1.4 *0±1.0 2.0±0.*5 *0±2.0 5/8� *6mm *6±1.0 *4±1.5 *2±1.0 2.0±0.5 *2±2.0 3/4� *9mm *9±1.5 *8±2.0 *4±1.0 2.5±0.5 *4±2.0 1� *5mm *5±1.5 *8±2.0 *9±1.0 3.0±0.5 *0±2.0 1.5� *8mm *8±2.0 *0±3.0 *0±1.5 4.0±1.0 *0±2.5 2� *0mm *0±2.5 *0±4.0 *0±2.0 5.0±1.0 *0±3.0 3� *6mm *6±4.0 **4±4.0 *7±.0 9.0±1.0 *7±4.0