Sell FKM/FPM COMPOUND

详情

  Fluorine Content
 *5.9%
 
Specific Gravity
 1.*0
 
Physical form
 Slab
 
Color
 Off-white
 
Solubility
 Ketones and Esters
 
Mooney Viscosity  ML *+*@********************
 

 
Instruction
FD***1C is a fluoroelastomer precompound which include copolymer of hexafluoropropylene and vinylidene fluoride, curatives.

It is designed for the bonding seal such as crank shaft seals and valve stem seals;extruded O-ring cord, hose and other profiles.

Features of FD***1C are:

l           Excellent mold release

l           Excellent hot tear resistance

l           Excellent bonding performance

l           Good compression set resistance

l           Good mold flow

Recommended Processing Procedures
FD***1C can be compounded with internal mixers or two-roll mills with standard fillers and other ingredients that are used in typical fluoroelastomer formulations. All the dry ingredients should be blended before adding to the rubbery solid. During compounding, full cooling should be accompanied. After mixing, the compound should be cooled as quickly as possible.

Packing information
FD***1C is packaged with PE film in carton. The weight is *0kg net per carton.

Safety and handling
l           Store in well ventilated place

l           Smoking is forbidden Strictly in working areas

l           Avoid eye contact

l           Wash thoroughly any contacted skin and clothing After handling.

l           Further safety and handing guide, can follow the product’s Material Safety Data Sheet or consult Dowhon’s people.

Typical properties of Vulcanizate

Compound                    PHR       

FD***1C                     **0        

MT Black(N**0)               *0         

MgO                         3         

Ca(OH)2                      6         

Carnauba Wax                  1         

Rheological Properties

**7℃