GSM/SMS alarm with short message

详情

Introduction: 1. Is a one-zone alarm system, very suitable for small office and home appliance. 2. Alarm system uses a GSM communicator, so is no distance limits to receive alarms or dial out to control the alarm system. 3. System can support GSM/CDMA cell phones. 4. Can store and dial 5 phone numbers (no longer than *6 character each one). If an alarm occurs, numbers will be dialed in order starting with last stored. You can set to dial monitoring center, police and owners. 5. Using remote controllers you can arm, disarm, panic from long distance. 6. You can control the system by using a telephone anytime, wherever you are. For security reasons a PIN code must be used for access. 7. Supports all kinds of wireless sensors, such as PIR detectors, door (gap) sensors, gas sensors, smoke sensors; panic buttons and infrared balusters are available. 8. Supports any wired sensors available (NC contacts) 9. Supports any combination of wired/wireless sensors, as you need. *0. No need for fixed telephone line. Is very suitable for cottage, house, shop, garage, everywhere a GSM Network is present. *1. For weak GSM signal area an external antenna can be used. *2. Three open collector outputs available to be used according to customer demands *3. One onboard relay available for customer application. *4. Easy to be installed and operated according to the instructions from this manual. Parameter: Operating voltage: DC6V Average power: AC/DC exchanger 2A. Wireless receiving distance: >**0m Operating Frequency: **5 or **3.*2 MHZ, GSM *******0MHZ. **0MHZ is optional. Operating voltage: DC*2V, AC **0/**0V Wireless receiving distance: >**0m***0m