Wireless Calling System LED Display Server

详情

Overview: LED Display Server (JX***2) - there is clock function. When there is no calling, it will show the time. When the calling comes in, it will immediately show it. There are 4 digits in the screen. You can set calling number as 2 digits. In this case, one screen can display two groups of calling numbers. The system is used with calling button with 2 keys which has cancel button. When waiters see the calling number, he will go to serve that table and press the cancel button on the table at first. Then the calling number will be deleted from the display screen. The next calling button will step forward. And the waiter will see another calling. This server is "call service first, be served first". You might be worried about just displaying two groups of calling numbers is not enough, please take it easy. The server has memory chipset which can store *5 calling numbers in it. In this case, all calling will be served one by one without missing. Specifications: Screen Size: 4.5 inch Display: 4 digits, two groups of calling number in one screen Capacity: **0 calling buttons Memory capacity: can hold up *5 incoming calls Display Alert: *4 tone polyphonic music & English Voice Broadcast Decoding Type: registration method RF output power: *0mw Dimension: **0x*0x**0 (mm) Power supply: **0V~**0V *0~*0Hz Frequency: **5MHz Accessories: Power adaptor: *2V DC stabilized supply(1unit) Server controller: You can use this controller to set the buttons and do the settings for the server. At first, since this system is decoded by the register method, you can use the controller to set calling number for each button. second, the server has nine power settings for a wonderful system. You can adjust time, adjust alert volume, select your favorite alert tone, the duration for displaying the calling number and etc. (1unit)