UNITMA
carbon heating film is based on a continous resistive sheet
providing heat evenly over the black surface areas.
UNITMA
carbon film consisits of a specially formulated semi-conductive
medium,coated onto polyester film.Power is fed to this resistive
coating by way of copper eletrodesthat are fixed to the
longitudinal edges of the heating areas.
This
structure is insulated by a lamination of polyester based films
that totally cover the element and is wider than the conductive
heating area,forming strong clear edges that are designed to accept
subsequent fixing to sub floor surfaces.
Low
temoerature carbon floor heating films produces a gentle heat that
evenly warms the entire room.Once the surfaces have been warmed,the
heat is reflected resulting in comfortable ,natural warmth with
minimum floor to ceiling termperature variation.
The
conventional manufacturing way of carbon heating involves the
fragmented processes of silk screening printing of the paste on to
a PET laminex sheet. This sheeting is then subjected to high
temperature in baking chamber. UNITMA film heater product is highly
stable. It is also more resistant to heat and less susceptible to
separation from pressure than any other product.
In this way, UNITMA guarantees a better finished product because
both the high quality conductive polymer material and the highly
sophisticated manufactruing process are controlled by any
source.
SPECIFICATIONS:
Width
Generating Power
Length(per roll)
*0cm(1.*4ft)
**0 watts/m
**0m(**2ft)
*0cm(2.*2ft)
**0 watts/m
**0m(**8ft)
**0cm(3.*8ft)
**0 watts/m
*0m(**2ft)
- Order production for other spec except *0cm, *0cm, 1m
width
Product Features:
Ideal for installation under any type of floating floor,
including laminates.
Provides radiant floor heat with a level of comfort that no
other heating method can match
Benefits the human body by applying far infrared heat
No electromagnetic waves emitted from the heating film
With its slim design, it is simple to install and ready to
use
Able to select desired temperature level for your own
comfort
Small or partial application is possible
Extremely energy efficient
Produces negative ions
Film will not wrap or malfunction through extended use
Heat Resistance Test
Products comparison:
Company Product
UNITMA
Product A
Product B
Product C
Melting Point
**0F ~ **7F
**7F ~ **4F
**6F ~ **3F
**5F ~ **2F
(**0C ~ **1C)
(*5C ~ *0C)
(*0C ~ *5C)
(*0C ~ **0C)
- This result shows that the melting point of UNITMA
heating film is approximately *6F(*0C) higher than other competing
products.
Adhesive Intensity(Insulating Properties)
Company Product
UNITMA
Product A
Product B
Product C
Intensity Level
*0kgf
*5kgf
*8kgf
*2kgf
- A higher intensity level also means higher durability
for preventing moisture penetration.
