Description:Non-asbestos gaskets come in a variety of basic
materials comprised of carbon, graphite, fiberglass, aramid fiber,
Kevlar and other mineral fibers. The basic components of the
non-asbestos materials used in gasket construction are elastomer
and filler.Add special adhesives and a little packing into it, then
roll and sulfurated. The elastomer composition corresponds to the
application of the gasket, assisting in the categorization and
selection of the gasket best used for the service it will be
performing. It is a replacement of asbestos gasket. The
Process:Gaskets can be cut based on your drawing or sample of the
gasket you desire. Basic I.D. x O.D. shapes can be cut by hand
however most die cuts gaskets require a die.The size are according
to API or DIN standard, also we can produce non-standard as
clients' request. Typical Properties of Common Elastomers (Rubber
Compounds) NBR - good for oils, gas, mild chemicals and water SBR -
good for saturated Steam, mild chemicals inert gas and water
Neoprene - good for saturated steam, refrigerants, oils, fuels,
mild acids and alkalies and water. EPDM - good for saturated steam,
mild chemicals and water Service Media & Applications:
Non-asbestos Gasket are widely used in the industries such as gas,
hydrocarbon, solvent, low pressure steam, weak acid and alkali
etc.They are applied to some industries of food, mechanical,
chemical engineering, petroleum and so on.. Performance of KL-G**0:
Non-asbestos Gasket for low pressure Temperature **0�C � *0�C
Elasticity ( % ) *0% Tensile strength ( N/mm2 ) ***0N/mm2
Non-asbestos Gasket for medium pressure Temperature =<**0�C
Elasticity ( % ) *0%~*5% Tensile strength ( N/mm2 ) *4N/mm2
Non-asbestos Gasket for for high temperature/pressure Temperature
=<**0�C Elasticity ( % ) *5%~*0% Tensile strength ( N/mm2 )
****0N/mm2
