Features of Industrial Dehumidifier
1. Sweden Proflute silica gel wheel
2. Dehumidification capacity: 7.2kg/h
3. Process Airflow: ***0m3/h
4. Aluminum alloy frame, anti-cold bridge
5. Foam injected double wall casing
5. Electric or steam heating can be available
6. PLC + HMI control system
7. Can work with cooling unit or stand alone
Dehumidification
Technology:
Fuda equipment removes moisture from air by using a
desiccant-a material which easily attracts and holds water vapor.
Desiccant dehumidifiers are especially well-suited to removing
moisture from air at low temperature and low humidity.
In Fuda units, the desiccant is impregnated into a corrugated
ceramic composite material which is formed into a wheel. Air passes
easily through the flutes, contacting the desiccant. The wheel
rotates slowly (6 to *0 rph) between two air streams. The incoming
process air stream air stream - the larger one - gives off its
moisture to the desiccant. The process air is dry as it leaves the
wheel. The humidity – laden wheel rotates slowly into a second,
smaller air stream which has been heated.
This smaller exhaust air stream – called the reactivation air –
warms the desiccant. The warmed desiccant gives off its moisture,
which is then carried away by the reactivation air. The newly dried
desiccant material is rotated back into the process air, where it
absorbs moisture once again.
