EIFS mortar

详情

USES Used to as adhesive for light building material such as foam board, polystyrene board; Provide exterior walls with an insulated finished surface, and waterproofing in an integrated composite material system. Features ***** adhesion, crack resistance ***** waterproof, damp-proof 3.Shock resistance ***** flexible *****, non-toxic Surface preparation The solid substrate should be clean, dry and free of oils, grease, wax, latex compounds, curing compounds, dust and all foreign matter. Application ***** it according to the ratio ( powder :water=*5:9) with electric drill-mixer in order to make the mortar homogeneous. 2. Evenly scrape the mortar on the surface. 3. If use polystyrene foam and reinforcing mesh to reinforce protection layer, scrape the foam board evenly firstly. Second press the fiber net and scrape evenly on it. Stand for *4 hours after it hardens. Go on the next operation. ***** should be finished bricking adjusting within *0 minutes. Precautions ***** sure vertical and horizontal veracity on the surface before ***** ***** the mortar is dry and curdy, dispose of it. 3. Don&#**9;t add more water in the mixture once the mixture is prepared. 4. Don&#**9;t apply the mortar in temperature above *0 degree or below 5 degree. Coverage: surface area is 2.0kg/m3 for scraping Remark Main ingredient: concrete polymer Package: *5kg/bag Storage: shelf life is minimum 1 year when stored in covered and dry environment.