Double-head cutting Saw CNC for aluminum window and door

详情

1. The machine is the most advanced double-head cutting saw equipment for Aluminum Window & Door
2. The machine adopts Europe model with neat appearance and good style.
3. The control system adopts the new closed-loop system.
4. The directly connected blade adopts Lever-swing cutting type.
5. The feeding of the blade is driven by airdraulic damping cylinder, with smooth cutting.

6. The imported blade with high precision makes the cutting surface smooth.
7. The servomotor drives the speed reducer to adjust the cutting angle in *5° ~**7.5°
8. The imported control system can ensure the cutting quality.
9. Several profile processing dimensions can be input one time and make continuous cutting.
*0. The processing dimension can be directly input; The cutting length can be changed without returning the reference point.

*1. The imported service motor with high moving speed and high precision should drive the sawing head.
*2. The airproof device under the worktable has wonderful crumbs-clearing effect.
*3. The following saw cover keeps it working in the clean environment
*4. The stuff follow-up supporter can reduce the machine space.
*5. The profile was clamped by three cylinders in every head, and kept the cutting security.

2. Main specification and technical parameter
1. Power supply: **0V *0Hz
2. Cutting motor power: 2X2.2 Kw Rotary Speed: ***0 r/min
3. Servomotor power: 3× 0.*8Kw Rotary Speed: ***0r/min
4. Operation air pressure: 0.**0.8MPa
5. Air consumption: *0L/min
6. Blade specification: **0mmX*0X4.4 Z= **0 (Standard size)
7. Cutter feeding speed: Stepless speed regulation **3m/min
8. Cutter moving speed range: 0~*0m/min
9. Cutting length: Max ***0mm min **0mm at *0 degree;
Max ***0mm min **0mm at *5 degree;

*0. Cutting width: **0mm
*1. Cutting height: **0mm
*2. Cutting angle: *5 degree; ***7.5 degree; Any angle in the range
*3. Repeat locating length tolerance: +/*0.2mm
*4. Cutting Profile Surface Plane: ≤ 0.*0mm
*5. Cutting Angle tolerance: +/- 5
*6. Cutting Profile Surface Roughness: Ra*2.5 u M
*7. Contour dimension: ***0mmX***0mmX***0mm
*8. Weight: About ***0kg