Conductivity/TDS/Salinity/Temperature/DO/PH Meter

详情

ELECON-P series are used to measure conductivity, total dissolved solid, salinity and temperature of solution. Adjustable Temperature Coefficient: Solution contained different ions usually have different temperature coefficient, ELECON-P series can be set in the range of 0 and 3.9% per centigrade degree. Adjustable Cell Constant: When measure solution with higher or lower concentration, you should choose different constant of conductivity electrode. The meter with three cell constants for your choose, it can save the measured value for different constant electrode separately. After setting the constant, you needn&#**9;t calibrate it again when replacing a new electrode. Adjustable TDS Coefficient: According to the theory of electrical conductivity, you need estimate TDS coefficient when measure total dissolved solid of solution. ELECON-P*0/**0 can be set in the range of 0.*1 to 1.*0, which can ensure accuracy of measured value. Hold Function: The meter with hold function, press MEAS/HOLD key, the meter momentarily freezes reading for easy viewing. Message Indicator: The meter with operational message indicator. When you need setup or measurement, the message indicator will help you what you can do and how do it. You can set parameter or select functions under it&#**9;s guide. Save Data: The meter can save *4 data sets, press SAVE key, and the meter will store current measured value, serial number, date, time and other information. Output Data: The data can be sent to computer through USB Communication interface, you can print out test report via software. What&#**9;s included: ELECON-P*0: CON1 Conductivity electrode(K=1). Temperature probe, Battery. ELECON-P*0/**1/**0: CON1 Conductivity electrode(K=1), CON*0 Conductivity electrode(K=*0), Temperature probe, Battery. Microprocessor-Based: ELECON-P series has built-in high performance CPU, it can work about **0 hours continuously with 9 volt battery.