YPZ2 Electro-hydraulic Arm-shaped disc brake

详情

Electro-hydraulic Arm Disc Brake passes ISO ***1 quality . Our Brake , port machine brake, industrial brake. Electro-hydraulic Arm Disc Brake , port machine brake, industrial brake, safe, efficiency and reliable. In accordance with German DIN ****5 standard. Electro-hydraulic Arm Disc Brake Main feature: ***** clearance device can always keep the clearance equal at both sides of the brake shoes during the application. Main swaying hinged points are equipped with self lubricated bearings with high efficiency of transmission and long service life.Lubrication is no necessary during the application. The brake spring is arranged in the square spring tube and the scale of brake torque is set at one ***** brake torque is shown directly, which is convenient and direct for adjustment. The asbestos free brake linings are of insertion type, which is convenient and quick for replcement. The automatic compensation device can keep the clearance of the hrake shoes and the brake torque constant druring the application. Some addtional functions can be realized by increasing the addtional devices. ***** brake Manual relase ***** or closed postion limit switch can realize the signal indication of whehter the brake is normally released or closed. ***** excessive wear limit swithc can realize the automatic signal indication when the brake linings are worn to te limit value. ***** Ed series thrusters adapted with the delay valve can realize the delayed engagement of the brake featuring in smooth braking. Electro-hydraulic Arm Disc Brake Operating conditions: 1.Brake Ambient temperature:**0°C-**0°C 2.Brake relative humidity no higher than *0%. ***** used for AC power of **0V, 3 phase, *0HZ(Version for *0HZ or voltage other than **0V can be supplied on request). 4.Sea level altitude:in accord with GB*****7, At temperature lower than **0°C , aero-oil YH**0 should be used as pressure fluid for else a heater must be added.Please see the te