Magnetic flowmeter

详情

 Diameter (mm) *0 *5 *0 *5 *2 *0 *0 *5
Qmin (m3/h) 0.*8 0.*4 0.*4 0.*3 0.*7 1.*5 2.1 3.5
Qmax (m3/h) 2 8 8 *2 *0 *2 *9 *4
Diameter (mm) *0 **0 **5 **0 **0 **0 **0 **0
Qmin (m3/h) 5.4 8.5 *3 *9 *4 *3 *6 **4
Qmax (m3/h) **7 **7 **0 **5 **1 ***6 ***0 ***3
Diameter (mm) **0 **0 **0 **0 **0 **0 **0 **0
Qmin (m3/h) **6 **1 **2 **3 **5 **5 **3 **0
Qmax (m3/h) ***5 ***4 ***5 ***2 ***2 ***3 ****0 ****4

General Specification:

Power Supply: *****5Vac (Optional: ****6 Vdc)
Power Consumption: *0W
Accuracy:
± 0.5% accuracy of rate from 0.***0 m/s
± 1.0% accuracy of rate from 0.**0.5 m/s
Repeatability: 0.2%
Minimum Fluid Conductivity:
5.0 micromhos/cm
Flow Direction: Unidirectional or bidirectional, 2 separate totalizers (programmable)
Analog Outputs: ***0mA, **0ohms Max Load
Output Frequency: Scaled Pulse output, (open collector) Max 5Khz
Noise Damping: Programmable
Pulse Width: Programmable up to **0ms
Zero-point Stability: Automatic correction
Ambient Temperature: *4 to **0° F (**0 to *0° C)

Electrode Materials:
Standard: **6 Stainless Steel
Optional: Conduct Factory
Liner Material: PTFE, FEP (Rubber)
Fluid Temperature: PTFE: **0°C Standard (Customized: **0°C)
FEP: *0°C
Pressure Limits:
1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa
Coil Power: Pulsed DC
Pipe Spool Material: **6 Stainless Steel
Meter Housing Material:
Carbon Steel welded
Flanges:
Carbon Steel - Standard (ISO *****1)
**6 Stainless Steel - Optional
Optional Stainless Steel Grounding Ring .
Diameter: ******0mm
Combination: S. Integrated type
             L. Remote type
Electrode Material: M. Stainless steel **6
                  *****
                  *****
H. Hastelloy alloy
P.Pt
*****
 
Features and benefits
   No moving parts; Virtually no pressure drop; Minimal maintenance
   Wide range of nominal diameters;
   Broad selection of lining and electrode materials
Applications for magnetic flowmeters are:
 Monitoring and control of a variety of industria