Hi Flowment Filter Cartridge

详情

Hi-Flowment Filter Cartridges General Description The Hi-Flowment Filter cartridge is a new product developed by Drofen Machinery Equipment Co., Ltd. in Shanghai China. It has a 6 inch/**2mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flowrate result in low investment and less manpowert in many applications Gradient pore structure 1. Up to **0m3/H flowrate per filter cartridge for water filtration. 2. Maximum *0% reduction of filter system 3. *0 inch /**8mm, *0 inch/***6mm and *0 inch/***4mm lengths are available 4. All contaminants can be removed within the cartridge because of the flow direction. Technical Specifications Materials of Components *-Filter media: Pleated glass fiber: Pleated depth Polypropylene(PP), or Melt blown PP *-Support/Drainage: Polypropylene(PP) *-End caps: Glass fiber reinforced Polypropylene *-O-ring seal: EPDM, Buna N, Etc Removal Ratings 1um, 4.5um, 6um, *0um, *0um, *0um, *0um, **0um Dimensions Outside Diameter: 6 inch (**2mm) Length: *0 inch(**8mm) *0 inch(***6mm) *0 inch(***4mm) Operating Conditions *-Maximum Operating Temperature: Pleated glass fiber:**1 Temp; Pleated PP: *2 Temp; Melt Blown PP: *5 Temp *-Maximum Differential Pressure: Pleated glass fiber: 3.4bar at **1 Temp Pleated PP: 3.4Bar at *2 Temp; Melt Blown: 1.*3Bar at *5 Temp *-Recommended Change out Differential Pressure: 2.4Bar at *0 Temp. *-Suggested maximum Flow of water: *0 inch length: **0LPM; *0 inch length: 1, **0L PM; *0 inch length: 1, **0L PM. Applications *- Prefiltration of RO, Pretreatment of sea water desalination *-Condensate water filtration, hot water recovery in power generation *-API, solvents, and water filtration in BioPharm market *-The filtration of bottled water, high Fructose, edible oil, soft drinks, and milk *-Paints and coatings, Petrochemical, Refineries *-Microelectronics, film, fiber and resin