stenter

详情

This stenter is designed for stentering or thermosetting woven or knitted fabrics (*****0G/M2) made of cotton, polyester etc. Detailed Description: This stenter is designed for stentering or thermosetting woven or knitted fabrics (*****0G/M2) made of cotton, cotton / polyester or other blended fibers. 1. Process Flow (1) Cylinder dryer: Open width entering-screw expanding and centering device-slant padder -cylinder drying(*0PCS) -plaiting (2) Heat-setting stenter: Open-width feeding- screw expanding - centering -automatic weft straightening(buyers supply, leave space for this device) -lower overfeeding -mechanical weft straightening -screw expanding - upper overfeeding -four- finger selvedge uncurling -infra-red edge controlling -pinning- stentering or thermosetting-air cooling -depinning - water drum cooling -plaiting Note: There are one set of drive guide roller and press roller should be added on the entry frame. 3. Main specifications: 3.1 Type: Hot air circulation, single layer horizontal 3.2 Hand: Left or right hand 3.3 Nominal Widthmm ***0 3.4 Adjusting Widthmm **0 - ***0 3.5 Nominal Speed *****0m/min 3.6 Overfeeding Range **0%**0% 3.7 Temperature in Chamber *****0 3.8 Heat Source thermo oil 3.9 Fabric Held by Pins(climb type) 3.*0 Delivering Plaiting 3.*1 Edge controlling: Red- infrared edging sensor 3.*2 Guide rail non lubricated steel tracks 3.*3 No. Of chamber 8 chambers (each is 3 meters long 3.*4 With Seimens PLC and FUJI inverters for main drive, including chain driving, padding, overfeeding. 3.*5 Air-conditioned control cabinets suitable to work under *5 3.*6 With two water cooling cylinders. 3.*7 No control bridge. With touch screen control. 3.*8 Cables supplied from control cabinets to machine. 3.*9 With TV, camera, and intercom system.