离岸价格
获取最新报价6.98 ~ 15.88 / Kilogram ( Negotiable )
|Minimum Order
位置:
-
最小订单价格:
最小订单:
100 Kilogram
包装细节:
25kg/drum and 200kg/drum
交货时间:
within 3 days after getting payment
供应能力:
8000 Kilogram per Day
付款方式:
L/C, T/T
联系人 Ms. JoJo
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong
Description:
HY-E635 is a perfect silicone product to make silicone concrete molds. it is featured with almost nil shrinkage and perfect fluidity; Without releasing any by-product with low molecular weight, and it\'s cured fully from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cured silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it\'s very ideal material for moldmaking and casting, such as stone concrete molds, cement molds, statue molds, reproduction for crafts or toys, and so on. The cured mold can be reused for hundreds of times, without transformation and distortion. Its durability is so strong that it sells very well in the global markets.
Applications:
E-635 can be used in not only the field of common RTV 2 part moldmaking silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicones, it has no problem of deep vulcanizing or reverse reaction, or other problem. Therefore, our addition cure silicone is particularly applicable for plaster silicone molds, cement product mold, other molds even with big size, and so on. It features with lower viscosity, high strength , good fluidity, so it can also be very suitable for the replication for the models with precision and complex pattern. From the following information, you will get a full view of its performance.
E-635 Standard Datasheet:
| Model | Appearance | Viscosity (cps) | Hardness (A°) | Tensile strength (Mpa) | Tear strength (KN/m) | Elongation (%) | Mixing ratio (%) | Operating time(H) | Curing time(H) |
| E-635 | Yellow | 30000±8000 | 35±2 | ≥4.0 | ≥7 | ≥200 | 2~3 | 0.5~1 | 2~5 |
