详情
Core to core alignment by PAS technology
( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image
display
USB & VGA interface
Software upgrade via USB interface
Specefications
Model KL***0T
Applicable fibers SM (ITU-T G.**2), MM (ITU-T G.**1), DS
(ITU-T G.**3), NZDS (ITU-T G.**5)
Fiber cleaved length 8~*6mm（Coating
diameter：**0µm）
*6mm（Coating diameter: **0 ~ ***0µm）
Fiber diameter Cladding diameter：*0 ~**0µm
Coating diameter：**0~ ***0μm
Fiber Count Single
Fiber aligning method Core or clad
aligning
Image processing method Digital
Actual average splice loss 0.*2dB （SM）, 0.*1dB (MM),
0.*4dB (DS), 0.*4dB( NZDS)
Splicing time Typical 9 sec，with standard SM
fiber
Splicing mode *3(templet), *0(user)
Splice loss estimate More accurate
Return loss ＞*0dB
Storage of splice result ***0 results，*0 parameter per
result
Fiber display and magnification **0X（X or Y view）,**0X（X and Y
view）
Tube heating time Typical *0 sec
Tube heating mode 9(templet), *4(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length *0mm, *0mm and a series of
micro sleeves
Tension test 2N
Electrode life ***0
No.of splice/heating with battery Typical **0 cycles
(splice/tube heat) with inner Li-battery
Display screen 5.6 TFT inch color LCD
monitor
Image change over The fiber image is turned upside
down
Terminals USB 1.1 and VGA
Operating condition 0 ~ ***0m above sea level, 0 ~ *5%RH
and **0～*0℃, respectively, Max. wind velocity of
*5m/s
Power supply AC ******0V with AC adapter; inner
Li-battery(***0mAH)
Dimensions **0mm(L) x**0mm (W) x**0mm
(H)
Weight 2.7 Kg excluding battery,3.2 Kg including
battery
