Gypsum plaster board
machinedetailed introduction:
Gypsum slurry is made up from plaster of Paris (calcined gypsum
powder), water and other additives, such as starch, foaming agent,
in a continuous mixer. plaster board
production line This slurry spreads from spouts of
mixer onto a moving sheet of paper. Gypsum board formed through
panel extrusion forming machine with back-front two layers
paper. gypsum board
production line Once formed, the gypsum board moves
on a shaping belt. During this journey, the plaster core has time
to set, or harden. And the required product information is printed
on the back of the boards via an ink jet printer. Then the board is
cut as specific length. The cut board are then turned over and
passed into multiple layers drying kiln. the drying kiln heated
through heating system (boiler). the more popular type is heating
oil conductive. plaster board
equipment Generally it takes *0mins for drying.
After that, the board exits and turns over again. After the boards
have dried, they are trimmed and stacked to form pallets. Here,
finish the whole production. Finished products are loaded for
market.
