详情
Contact cement is a neoprene based glue and can be thinned with
toluene.
Contact Cement (SK***1)
Neoprene Adhesive, Neoprene Glue
Feature
The product is the single component of volatile dry type adhesive
with perfect performance of high first adhesive ability, proper
viscosity, easy for painting, high adhesive intensity and could be
widely used in many fields for the bond materials.
Main Component: Neoprene
Technical Data
Description Parameter
Appearance Light yellow thick liquid
Viscosity (*5º C, mPa. S) ***0~***0
Solid Content (%) *4+/_2
Peel Strengthen (*5º C*8h, canvas-canvas N/2.5cm ) ≥ *0
Scope of Application
This product could be used to bond rubber, plastic, leather,
canvas, wood, metal, especially for the hard material bonding with
soft material, like the bonding of rubber and metal. The
application field is as wide as the construction decoration;
Advertise sign, furniture decoration and machine manufacture
etc.
Using Method
1. Clean the adhesive surface so as to avoid the effecting of the
intensity. For smooth surface, it is better to passivity it with
sand cloth (for rubber material, use file) firstly, then wash it
with gasoline or acetone and dry.
2. Paint the glue onto the surface evenly, for rubber material; It
is needed to paint the glue about **2 times. For canvas material,
paint it **3 times. Every time of the painting, test the surface
with hand. If there is no adhesive to the hand but having
viscosity, it is okay for the second painting. Finally, bond the
surface with pressure after leaving them for some time. The average
leaving time is ***0 minutes. For the details, it should depend on
the exact situation of surround. The glue quantity for painting
every time is ******0g/m² .
3. The application adhesive could be achieved after drying for *8
hours at the room temperature of *5Centigrade. The best adhesive
performance is available after leaving aside for 6 days.
Warning
1. The operating environment should be ventilate and should keep
away of the fire.
2. Before application, the solidifying time could be reduced by
adding natrium with ***5 percent, which could improve the adhesive
intensity also.
3. Painting tools could be brush, scraper etc. And could wash them
with Ethyl acetate and dry for next application.
4. Tighten the lid to avoid the volatile of the glue after usage.
Dilute the glue with Ethyl acetate if it is too thick.
5. Take strict precautions against touching by the kids and
swallowing.
For more information please refer to our Website
Storage and Packing
1. Stock the products in the air-tight seal at the temperature of
****5Centigrade the shelf life is one year. It is available to use
based on passing of the test if being beyond the shelf life.
2. Preserve and transport as flammable products.
3. Packing specification: **0ml/tin, *2tins/ctn.
