Yesilbayir Mah. Simsir Sok. No: 3, ISTANBUL - TURKIYE, Hadimkoy
现在联系
详情
Properties
Neutral cure. Suitable for use on most common porous and
non-porous building materials
Suitable on concrete and mortar
Not affected by exposure to sunlight, rain, snow and maintains
this resistance over many years
Low-modulus
Noncorrosive. It will not react with or corrode common building
materials
Resistant to temperature extremes
%**0 Silicone, solventless
Almost odourless
Fast curing
Applications
General weathersealing and glazing in building and curtainwall
facades
Sealing of window frames
Mounting of window frames and doors
Sealing applications of marble, stone and other porous
substrates
Sealing of connection and expansion joints.
Instructions
Ensure all joints are cleaned and foreign matters like oil,
dust, water, dirt, frost, old sealants etc are removed.
Prior testing is recommended before the application.
It is recommended to make the application between *5 °C and **0
°C. In order to reduce the deformations of the joints, their depth
must be much less than their width, minimum dimensions are 5 x 5
mm, for wider joints the depth should be preferably half of the
width and it is adjusted by the use of a back up
material.
The applied sealant should be tooled within 5 minutes before a
cured skin forms
