AKFIX AS606 SILICONIZED ACRYLIC SEALANT

详情

 Properties
 

• Permanently elastic after cure
• Can be used on all porous surfaces such as brick, concrete wood etc.
• Very easy to apply and clean
• Water-proof after curing
• Resistant to weathering such as rain, snow and sunlight
• Solvent-free
• Overpaintable
• No odour 
  

Application

• Sealing of low and medium movement joints between various construction materials (wood, concrete, 
• brick etc.)
• Sealing joints between windows, walls, doors etc.
• Filling cracks in walls and on ceilings

Instructions
The joints must be clean and free from dust, grease and rust. No primer is required for non-porous surfaces. On porous surfaces such as concrete, stone, cement and plaster a primer (mixture of one part acrylic sealant and **5 parts of water) can be applied. Min/max joint width must be 5mm/*5mm. The recommended joint depth/width ratio is 1 to 2. Application temperature is between *5 °C and **0 °C. Immediately after the application, smooth the sealant at once with wet finger or a wet tool. Excess sealant can beremoved by a wet clothe. Keep the sealed joint dry at leastfor two hours. Cured sealant can be removed mechanically.