CRS series
resistors 1/8 to 3W, 1ohm to 1M ohms ( 2%) and 1ohm to *0M ohms (
5%)
Characteristics:
Operating temperature range: **5 to ***5°C
Power range: 1/8, 1/4, 1/3, 1/2, 1, 2W
Max Continuous Working Voltage: **0, **0, **0V
Max over load voltage: **0, **0, **0V
Insulation resistance voltage: **0, **0, **0V
Please check our specification or contact us directly
Introduction:
The resistance temperature coefficient of carbon film resistors
is relatively high
Their resistance value changes inversely with temperature but,
as they are big in volume, causing quick dissipation of heat and
low temperature rise, they are good enough in quality stability and
reliability and are therefore popularly used in consumer electronic
appliances
Our CR series carbon film fixed resistors have the following
features in particular
Feature:
Automated mass production, low prices
Exception long-term stability
Standard tolerance: ±2%, ±5%
Variety of packaging-bulk, and taped, cut and formed
supplied
CR series resistors 1/8 to
3W, 1 to 1M&branded; ( 2%) and 1 to *0M&branded; (
5%)
Characteristics:
Operating temperature ranges: **5 to ***5°C
Power ranges: 1/8, 1/4, 1/3, 1/2, 1 and 2W
Maximum continuous working voltages: **0, **0 and **0V
Maximum over load voltages: **0, **0 and **0V
Insulation resistance voltages: **0, **0 and **0V
Please check our specification or contact us directly
Introduction:
The resistance temperature coefficient of carbon film resistors
is relatively high
Resistance value changes inversely with temperature, but as
they are big in volume, causing quick dissipation of heat and low
temperature rise, they are good enough in quality stability and
reliability, and are therefore popularly used in consumer
electronic appliances
Our CR series carbon film fixed resistors have the following
features in particular
Features:
The most economic industrial investment
Standard tolerance: ±5% (available ±2%)
Excellent long term stability
Termination: standard solder-plated copper lead
Variety of packaging-bulk and taped, cut and formed
supplied
Applications:
Automotive
Telecommunication
Medical equipment
Carbon Film Resistor with SMD
Style Carbon Resistor, Suitable for Reflow, Flow and Iron
Soldering Features: SMD style carbon resistor Free direction
for mounting due to cylindrical design High solder ability due to
specially plated electrodes Electrodes strength is higher than flat
chip resistors Lower current noise than thick film flat chip
resistors Suitable for reflow, flow and iron soldering Wide range
packages: ***4, ***7 and ***9 Tolerance: ±2 to 5%
Applications: Automotive Telecommunication Medical
equipment Consumer product
Please feel free to contact us if there is any demand.
Please send us your spec. and requirement. Brand Name: SMR,
VIKING
