详情
Hydrogenation Conversion
Catalyst
1.Product
Description
Hydrogen is one of the
basic raw material of oil refining and synthetic ammonia industry,
at domestic and overseas have widespread use of the hydrocarbons
into hydrogen, raw material steam legal system for natural gas,
light oil and oil refinery by product of refinery gas, but these
materials contains high of organic sulfur, usually higher as high
as approximately **0 to **0 PPM , it can not use desulfurizer
eliminate, such as into the next working procedure so that lose the
activity in the steam conversion, transformation and the methane
conversion agent produce harm. At the same time refinery gas also
contains some olefins, these olefins conversion into steam as
furnace steam reforming catalyst carbon and damage the furnace
pipe. In order to make conversation the organic sulfur and olefins
conversion for hydrogenation, catalytic hydrogenation can
effectively reduce the hydrocarbon organic sulfur and alkene,
cooperate to use ZnO desulfurizer, can satisfy the requirements of
raw materials into steam.
Hydrogenation
Conversion Catalyst, using Al2O3/TiO2 with large
specific surface area and big pore volume as compound carrier, is
made of activated composition as Co, Mo and a little auxiliary
agent. It has good abrasion-resistance, high hydrogenation
conversion activity, and good low-temperature activity and has
double roles of hydro-desulfurization and Olefins
saturation, and it can be widely applied in the process of
hydro-purification of hydrocarbonraw
materials.
2. Technical
Specification
|
Item
|
Index
|
|
Size
|
Φ3×***5mm
|
|
Color
|
Aram gray
|
|
Shape
|
Trifolium or Cylindrical
shape
|
|
Pore volume,
ml/g
|
0.4
|
|
Surface
area,m2/g
|
≥**0
|
|
Bulk density,
g/ml
|
0.*5~0.*5
|
|
Crushing strength,
N/cm
|
≥
*2
|
|
Abrasion
loss,%
|
＜
2
|
|
Thiofuran
conversion,%
|
≥
*0
|
