详情
热塑性橡胶SEBS产品耐老化性能优良，广泛用于高弹性制品、包履材料（工具手柄）、聚合物改性、胶粘剂与密封剂、医疗器械、电线电缆的填充料等。
SEBS is of excellent aging
resistance and used for highly elastic products, packing material
(tool handles) polymer modification,adhesives,sealant,meddical
treatment equipment and fillers of wires and cables.
SEBS具有较好的耐温性能，其脆化温度≤－*0℃，最高时使用温度达到**9℃，在氧气气氛下其分解温度大于**0℃。SEBS有优异的耐老化性能，在人工加速老化箱中老化一星期其性能的下降率小于*0%。SEBS有优良的电性能，其介电损耗在一千赫为1.3×*0，一兆赫为2.3×*0；体积电阻是一分钟9×*0&branded;-cm,二分钟2×*0&branded;-cm。SEBS具有良好的溶解性能和共混性能，其溶解度参数在7.**7.6之间。
SEBS is of good temperature
endurance with brittle temperature lower than
**0℃ and highest service temperature at
**9℃,Under oxygen surround. The decomposing point is
higher than **0℃.SEBS has excellent aging resistance
and the drop rate of its performance is less than *0% after being
aged in the artificial aging accelerator for one week.
SEBS
is also very good at electrical property Its dielectric loss is
1.3×*0 at 1KHZ and 2.3×*0 at 1MHZ; its volume resistance is
9×*0&branded;-cm one minute and 2×*0&branded;-cm two
minutes. SEBS has good solubility and co-mixing capacity with
solubility between 7.2～7.6.
主要牌号有：YH***1、YH***2、YH***3、YH***1、YH***2、YH***3
