详情
CS***0 navigation box supports software from
Navitel, IGo***6, IGo8, Garmin etc. In case a new version of the
navigation program is released, it can be easily updated as the
navigation device is installed into the specially provided place
with direct access to SD card.
CS***0 navigation box can be installed into
Lexus, Toyota, Mazda, Subaru, Acura, Honda and other cars with
built-in color display (including touch screen) and navigation
system. The device can be connected to any additional screen with
RGB or composite input.
*CS***0 navigation box installation does not
cause wiring damage (it is performed without wire cutting off) and
allows user to keep the car warranty valid.
CS***0 Navigation Box Technical Specifications
- CPU: Samsung ***0 ARM9 **0 MHz
- OSLanguageLocalization: WIN CE 5.0Eng.Rus.(Eng.)
- Memory: Nand *4 MB, SDRAM *4 MB
- Memory card: MMC, mini SD, SD, SDHD up to *6 GB (SDHC depends
on the manufacturer)
- Video Out:
- RGB **0 x **4 (according to the firmware)
- RGB **0 x **4 (according to the firmware)
- Video Out: 1 x RCA NTSC 3.*8 MHz
- Audio Out:
- 1 x RCA stereo 0.*5 W
- 1 x mono jack 3.5 mm (for the speaker)
- USB Host: 1 x Type A (for external devices)
- USB Device: 1 x Mini USB (deactivated)
- Control:
- 1 x Remote control with a touch pad
- Touch screen (via USB controller or cable for multimedia
receiver) *1
- Onboard control devices (adapters for Toyota, Lexus, Mazda,
Subaru) *2
- GPS:
- MTK MT***9T
- Channels: *6
- Frequency: L1 ***5.*2 MHz
- Sensitivity ***5 dB
- Reacquisition: 1 s
- Protocol: NMEA***3 V3.*1: GPGGA (1 time/1 s), GPGSA (1 time/5
s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s),
(additionally GLL or MTK NMEA Command)
- HotWarmCold start: < ****0 s
- Antenna: SMA active (cable length 5m)
- Power supply: *0~*0 V DC
- Main board dimensions: **0 mm x **0 mm x *6 mm
- Weight: 1.**0 kg
1 USB controller and cables for multimedia receivers are not
included in the package
2 Adapters for Toyota, Lexus, Mazda, Subaru are sold only together
with navigation box.
Navigation Software Installation Tips
- Default way for navigation software installation on memory
card: NaviNavi.exe
- Navigation software settings:
- GPS receiver COM port: COM1
- GPS receiver rate: ***0
- Video output resolution: **0×**4
CS***0 Navigation Box Package Content
- CS***0 navigation box
- Remote control
- GPS antenna
- External speaker
- 2 GB SD memory card
- 2.5 m power cable
- Data cable
- RGB cable (9 Pin)
