MR**1 series, based on NXP PCD, is the desktop reader. The reader
supports series IC cards according to ISO****3A, ISO****3B and
outputs the data by the way of simulation keyboard through USB
interface. MR**1 IC card is desktop reader with USB interface (HID
standard). In the systems of Windows, Linux and other PC systems
support USB keyboard, the reader imitates the USB keyboard to
operate the card data. With our software and DIP switch, the users
can set the reader if to read the number of the card or the data of
the card or both. And the data can be positive sequence output or
be reverse order output. Meanwhile the users can choose freely the
key output such as enter, tab etc. after the output of the number
and the data of the card.
The default of the
MR**1 is configuration mode in factory setting. If you want to let
the reader work, you need deploy it through the software and input
the configuration information to the reader. The reader embeds 2
SAM card slots. If the users need read the SAM card and use the SAM
to cooperate with the operation, and then you can contact us, we
will help you do the job.
