详情
The IIJ-II is a fully automatic liquid dielectric test set,
typically used for testing the voltage breakdown level of
insulating oils. The most commonly used testing standards are
preprogrammed into the controls. Just hit the start button and the
test is performed. Custom test sequences can also be programmed.
The results are stored internally for downloading to a computer
and/or for printing on the printer included.
Technology and parameter
data
1. Power supply: AC**0V *0%, *0
HZ
2. Voltage output: *0 KV, *0KV,
**0KV
3. Capacity: 1.6KVA,
2.0KVA
4. Pressure increase rate : About 2
KVA/S
5. Pressure testing speed:
3%
6. Break down sensitivity :
<2KV
7. Wave form distortion
:≤3%
8. Time of break down:
≤*0ms
9. Operational environment:
Temperature:0°C**0°C, Humidity: the most relative
humidity*5%
*0. Storage environment :
Temperature:**0°C**0°C, Humidity: the most relative
humidity*5%.
*1. Operational height: <**0m
(can be specially designed if the height is over
***0m)
*2. Test cell: Glass, volume **0 to
**0 ml, with protective cover and stirrer.
*3. Electrodes: Stainless steel
spherical *6 mm diameter/hemispherical *5 mm radius,
2.5 mm gap as per IEC***6.
*4. Nitial stand time of oil
sample: **0 seconds
Intermediate stand time of oil
sample: *0 seconds
String time of oil sample: *0
seconds
Number of consecutive test:
6
