看起來你不是TradeKey.com的會員。 立即註冊,與全球超過7百萬的進口商和出口商建立聯繫。 立即加入 |
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
Sell RTV silicone rubber for printing pads

Sell RTV silicone rubber for printing pads

离岸价格

获取最新报价

6.5 ~ 16.89 / Kilogram ( Negotiable )

|

Minimum Order

位置:

-

最小订单价格:

最小订单:

200 Kilogram

包装细节:

20kg/drum and 200kg/drum

交货时间:

3 days after receive your payment

供应能力:

8000 Kilogram per Day

付款方式:

L/C, T/T

现在联系
免费会员

联系人 Ms. JoJo

Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong

现在联系

详情

Description:
The product with the advantages of high temperature resistance, abrasion resistance,  good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The product can be used to make high-quality silicone tampo print pad, which is mainly applicable to plastic toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicone rubber pad is a carrier which transfer printing the patterns on the steel plate onto the toy products\' surface.
 
image

Standard Datasheet:
 

Model Appearance Viscosity (cps) Hardness (A°) Tensile strength (Mpa) Tear strength (KN/m) Elongation (%) Mixing ratio(%) Pot life(H) Demould time(H)
901 red / yellow
/ green / white
≤33000 28±2 ≥3.0 ≥20 ≥360 2~3 0.5 2~4
 
Operation Instruction for Print silicone rubber 
1.Fully clean the prepared mold and dry the mold with an air gun(also you can dry it by wiping it with a clean cloth).
2.Spray some release agent on the surface of the mold.                     
3.The ratio of silicone an silicone oil depends on actual demands. If you need soft printing pad, then you could add more silicone oil; Otherwise you can add no or less. Normally, The hardness range  from 15 A° to 25 A° is appropriate.   
4. Do not add too much silicone oil, it will ruin the silicone pad.   

image


 

Send a direct inquiry to this supplier

至:

Ms. JoJo < ShenZhen Hong Ye Jie Technology Co., Ltd >

我想知道: