Laminated Veneer Lumber ( Building Structural Beam )

详情

Laminated Veneer Lumber ;
Building / Structural LVL Beam ;
Packaging LVL
Scaffolding Board
Fumigation Free 
(Samples Are Available )
LVL can be used for horizontal and vertical solutions, providing a dimensional precision which gives architects greater design possibilities.
       
         Good for long spans, with minimal deflection, LVL is ideal for roof/floor joists and lintel/framework studs, both in new build andrenovation, where strength is needed. The timber that LVL is manufactured from comes from sustainably managed forests.

Laminated Veneer Lumber
        Laminated veneer lumber (LVL) is a structural product manufactured from thin rotary peeled veneers of wood usually 3mm thick, glued with a durable adhesive with the grain running parallel to the main axis of the member.

       These panels have excellent bending resistance, tension and compression properties and greater load-bearing capacity than traditional materials.

• Material: poplar  or eucalyptus
• Sizes:Benefits
          Reduced twisting, warping and splitting, makes LVL easy to build with, providing time and cost savings.   
  • Length: 2,**0, 3,**0mm
  • Width: *0 to 1,**0mm
  • Thickness: *5 to **0, *2/*4,
  • Regular Size : 2,**0 x 1,**0 x *5/*2/*4m
  • Glue: MR, E2, E1,WBP
  • Minimum order quantity: one  *0ft HC

         Specification
         • Available in a wide range of sizes
         • With a grain that runs longitudinally through the veneer layers, LVL is specially kiln dried to ****5% moisture content

•  Uses: for all kinds of fumigation-free packaging ; formwork ;Construction beams, rafters and columns for wide range of buiding structurals .                    

•   LVL is often used to complement the use of sawn timber in domestic construction.

•  In commercial or industrial structures it is often used as a wood-based alternative to structural steel or reinforced concrete.

•  Generally LVL is chosen when sawn timber is not strong enough to support the structural, or longer lengths are needed.

  • Packaging Material for mechanical Eequipment

  • Quality standard:
    • Even thickness, no unglued and no bubble, on the face
    • The color should be consistent
    • No glues passing through, no worm bore
    • No mildew and no crack
    • Can be jointed or repaired in the back
    • Static bending strength: ≥*0MPa
    • Modulus of elasticity: ≥7,**0MPa