详情
Fortune Stainless Steel
Pipe
1. Manufacture Standard: ASTM A**4/A**2/A**9/A**9/A**0
2. Grade of
Material
①**6 (Cr: ****8% Ni:
*0%)
②**4
(Cr:*8% Ni:8%)
③**2 (Cr: *4%
Ni: 3.5% or 4.5%)
④**1 (Cr: *3%
Ni:0.9%*1%)
⑤**1
⑥**0
⑦**9
⑧**1
3. Sizes:
6mm***3mm
4. Thickness: 0.3mm -
3.5mm
5. Length: 6m as standard but any length less than *0m
6.Surface
Treatment:
①Mill Finish/2B
②**0G/**0G/**0G/**0G
Satin/Hairline Finish
③**0G/**0G Bright Finish ④Mirror
Finish
7.
Tolerance:
①Outer Diameter: +/*0.1mm for less
than OD *5.4mm, +/*0.*5mm for less than OD *0.8mm, +/*0.2mm
for more than OD *0.8mm
②Wall Thickness: as per customers'
request
③Length: 0mm/*5mm
8. Lead
Time: *5 to *5days for one FCL; *5 to *0days for one LCL.
9. Payment term:
①. *0% as deposit and *0% before shipment
②*0% as deposit and *0% against BL copy
③*0% as deposit and *0% by LC at sight
*0. Test before production
Samples taken to Foshan Metal Inspection Lab for chemical
composition test, including C/Si/Mn/P/S/Cr/Ni/Cu/N/Mo
*1. Inspection during production
1). Outer diameter/Side length within specified tolerance
2). Thickness within specified
tolerance
3). Length within
specified tolerance
4). Straightness
5). Welding Seam
6). Burr-clean end of two sides
7). Surface without hole/hollow/scratch/blister/peeling
*2. Tests before shipment
1). Elongation Test 2). Pipe-Expanding
Test
3). Flattening Test 4). Bending
Test
*3. Packing
1) Bundle pack:
① Small bundle: Each tube sleeved in plastic bag
individually, then about *0kg tubes packed by seaworthy weaving
bag, which is suitable for carrying by hand
② Big bundle: Each
tube sleeved in plastic bag individually, then about
**0kg tubes packed by seaworthy weaving bag, which is suitable for
forklift operation
2). Steel Crate Box: Each tube sleeved in plastic bag
individuallyand several tubes packed by bubble bag, then
about one ton tubes put into a steel crate box with tin plate in
each side of box
3). Wooden Case: Each tube sleeved in plastic bag individually
and then put into a wooden case with fumigation stamp
