详情
Fortune Stainless Steel
Pipe
1. Manufacture Standard: ASTM
A**4/A**2/A**9/A**9/A**0
2. Grade of
Material
①**6 (Cr: ****8% Ni:
*0%)
②**4
(Cr:*8%
Ni:8%)
③**2 (Cr:
*4% Ni: 3.5% or
4.5%)
④**1 (Cr:
*3%
Ni:0.9%*1%)
⑤**1
⑥**0
⑦**9
⑧**1
3. Sizes:
6mm***3mm
4. Thickness:
0.3mm - 3.5mm
5. Length: 6m as standard but any length less than
*0m
6.Surface
Treatment:
①Mill
Finish/2B ②**0G/**0G/**0G/**0G
Satin/Hairline Finish
③**0G/**0G
Bright
Finish ④Mirror
Finish
7. Tolerance:
①Outer
Diameter: +/*0.1mm for less than OD *5.4mm, +/*0.*5mm for less than
OD *0.8mm, +/*0.2mm for more than OD *0.8mm
②Wall
Thickness: as per customers' request
③Length: 0mm/*5mm
8.Lead
Time: *5 to *5days for one FCL; *5 to *0days for one
LCL.
9. Payment term:
①.
*0% as deposit and *0% before shipment
②*0%
as deposit and *0% against BL
copy
③*0%
as deposit and *0% by LC at sight
*0. Test before production
Samples taken to Foshan Metal Inspection Lab for
chemical composition test, including
C/Si/Mn/P/S/Cr/Ni/Cu/N/Mo
*1. Inspection during
production
①Outer diameter/Side length
within specified tolerance
②Thickness
within specified
tolerance
③Length within specified
tolerance
④Straightness
⑤Welding
Seam
⑥Burr-clean
end of two sides
⑦Surface without
hole/hollow/scratch/blister/peeling
*2. Tests before shipment
①Elongation
Test ②Pipe-Expanding
Test
③Flattening
Test ④Bending
Test
*3. Packing
1) Bundle pack:
①Small bundle: Each tube
sleeved in plastic bag individually, then about *0kg tubes packed
by seaworthy weaving bag, which is suitable for carrying by
hand
② Big
bundle: Each tube sleeved in plastic bag individually, then about
**0kg tubes packed by seaworthy weaving bag, which is suitable for
forklift operation
2). Steel Crate Box: Each tube sleeved in
plastic bag individuallyand several tubes packed by bubble
bag, then about one ton tubes put into a steel crate box with tin
plate in each side of box
3). Wooden Case: Each tube sleeved in plastic bag
individually and then put into a wooden case with fumigation
stamp
