详情
SinoV****0E
is a *0 port FXS/FXO analog Asterisk PCI-E card.
SinoV****0E
is a *4 port FXS/FXO analog Asterisk PCI-E card.
which is
mainly applied to PSTN environment. It supports all the functions
of Asterisk PBX systems needed.
Main
Features:
* High
security: It adopts tertiary thunder preventing technology, can
prevent the thunder and lightning from striking
effectively.
* No
additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality.
* World
Wide Usable: Configurable line interface meet global telephone line
interface requirements.
* User could choose any of
combinations of FXO_**0 or FXS_**0 modules according to customer’s
requirements.
* *2 bit
bus master DMA data exchanges across PCI Express interface at
**0Mbytes/sec for minimum host processor intervention.
* The high
stability firmware is exported / imported with DMA data exchange,
so it accelerated and reduced CPU load greatly. Under the
environment of the same hardware, CPU rate of utilization is equal
to CPU rate of utilization of using *4 port analog
card.
* It
supports all the functions of Asterisk PBX systems
needed.
* Easy to install: Both
software and hardware compatible with Digium Asterisk
card.
*
Humanization is designed: The module socket that should be nipped
is all adopted and stuck to one slice of sockets, can prevent
stabing users finger effectively.
* For 4U
chassis.
New
function:
* Easy to install , using
way is same as DIGIUM Asterisk card
* If use
Trixbox/Elastix/Freeiris2 IPPBX software, it can automatic
recognition our cards, don’t need to install any
drivers.
Product
Spotlight
SinoV****0E is a new analog card. It
can be used for connecting analog telephones and analog POTS lines
through a PC. It delivers the superior voice quality on both FXO
and FXS interfaces in all *4 ports.
· Adjustable Interrupt Routing
Design
· Interrupts Frequency
Adjustment
· Up to *4 Simultaneous PSTN Calls
(Per PCI Slot)
· Compatible with All Commercially
Available Motherboards
· *-Month “No Question Asked” Return
Policy
· Lifetime Warranty
Overview
SINOV****0E is a new generation
analog card with interchangeable FXS_**0 and FXO_**0 modules. It
can eliminate the requirement for separate channel banks or access
gateways.
The SINOV****0E contains *2 module
banks. Each bank supports one analog interface. The module banks
may be filled with up to FXO_**0 or FXS_**0 modules enabling the
creation of any combination of ports. Scaling of an analog card
solution is accomplished by simply adding additional cards.
SINOV****0E works with Asterisk®,
Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and
IPPBX/IVR projects as well as other Open Source and proprietary
PBX, Switch, IVR, and VoIP gateway applications.
Target
Applications
· Channel Bank Replacement / Alternative
· Small Office Home Office (SOHO)
applications
· Small and Medium Business (SMB)
applications
· Gateway Termination to analog
telephones/lines
Services and
Features
· Caller ID and Call Waiting Caller
ID
· ADSI Telephones
· Loopstart Signaling Support
Technical
Specifications
· Up to *4 ports through a
combination of FXS_**0 and FXO_**0 modules
· Full-length analog card
· Up to 2 quad FXS or FXO
modules
· RJ*5 connector
· **-bit *3MHz PCI-E and fully PCI-E
compliant, compatible with all commercially available motherboards,
and proper sharing of PCI interrupts
· *2 bit bus master DMA data
exchanges across PCI interface at **2 Mbytes/sec
· Autosense compatibility with 5 V
and 3.3 V PCI busses compatible
· Power: 8.*1W Minimum, *8.*4W
Maximum at 3.3 V or 5 V.
· Operation temperature: 0°C to *0
°C
· Storage temperature: **0°C to
**5°C
Operating
Systems
· Linux (all versions, releases and
distributions from 1.0 up)
Minimum Hardware
Requirement
· ***-Mhz Pentium III
· **8MB RAM
· Available PCI-E Slot
