详情
Features
1.KY**6R is an
one-component room temperature curing silicone Sealant.It is a
temperature resistance sealant made from a special silicone rubber
material.
2.High and Low temperature
resistance.It could be in a long-term working status from **0 to
**0℃.The temperature could be reach
**5℃ if it is working in an instantaneous
status.
3.It is an
excellent adhesion,anti-aging,moisture-proof,Shockproof
and avoiding leakage of electricity,
4.Non-toxic and
environmental adhesive accord with RoHs standard
Usage
Widely used in bonding
and sealing basic board panel of steam electric iron,electric
tube,electric cooker,electric frying pan,coffee maker,heating
pipe,high temperature oven,high temperature pipeline
Specification
|
Item
|
Data
|
|
Appearance
|
Red glutinous
liquid
|
|
Initial Drying
Time(min)
|
*5~*0
|
|
Density（g/cm3）
|
1.*5~1.*0
|
|
Hardness(JISA)
|
*5~*5
|
|
Temperature
resistance（℃）
|
–*0~**5
|
|
Elongation(%)
|
**0~**0
|
|
Tensile
Strength
(kgf/cm2)
|
≥5
|
|
Adhesive
Strength
(kgf/cm2)
|
≥6
|
*All above mechanical
properties and electrical properties data was tested after curing 7
days in*5℃ and*5％ relative humidity
condition.
How to use
1.Clean out rust,dust and greasy dirty of the
surface before used
2.Take
off the cap from the unit, put on the plastic month on it and cut
the plastic month with a suitable size then press the glue onto the
parts with hand or gluing tools.The cap must be put on and well
sealed after using
3.Curing:Put the parts which finished gluing in a
flat place,the glue would be cured from surface to interior,in *4
hours(room temperature and *5% relative humidity degree) the curing
depth could be 2~4mm.But if the glue of the part are too thick to
contact with air,the curing time will be longer.In low temperature
and relative humidity the curing time will also be
longer.
Packing
◆ *0g/pc（Aluminium
Tube） **0pc/ctn
◆ **0g/pc（Aluminium
Tube） **0pc/ctn
◆ **0ml/pc（PE Cartridge
Packing） *5pc/ctn
◆ ***0ml/pc（PE Cartridge
Packing） 4pc/ctn
Storage:
1.Store in*5℃ and shelf life is 6
months.After testing the adhesive could be cured in regulate
time,it could also be used after 6 months
2.Non-dangerous
goods.It could be shipped as a general chemical
product.
