详情
1, Introductions
JMDM-RS**2 serial port controls relay (transistor) board is a
high reliable industrial controller which independent
research and development by Shenzhen jingmin digital machine
Co., Ltd. Can be used to serial control the input and
output of a variety of digit quantity / switch quantity
signal. the Functions as follows:
1, Collecting the switch quantity signal input state through
the controller, real-time displaying to the PC
monitoring
interface through the serial port.
2, Controlling the ON and OFF of the relay (or transistor)
through the computer serial port, to achieve a variety
of
switch quantity control.
Having extensive application values in various types of civil
and industrial occasions, Win the customers' respected
and loved for their excellent performance and
cost-effective,
Two, the Using instructions
1. Connecting the wiring between the controller and the
equipment and the serial port communication wiring between
the
computer and the controller according to the wiring
diagram supplied with the instructions.
2. connecting the controller power supply after careful
examination and correct.
3 Installing the serial port control software and supplied
with the products:
To Double-clicking JMDM serial port controller PC
procedure SETUP setup file or direct double-click JMDM serial
port
controller PC procedure SETUP support setup file.
4. Opening the PC software, can click to control input and
output point.
3. Functional description
1. JMDM-RS**2 serial port controller used in the ON and OFF of
the relay (or transistor).
2. After the PC (the PC or host PC) connecting to this
controller through the serial port, sending a string of ASCII
code
instructions to the controller can control some (or all) relay
open or close, totally unnecessary to consider the
hardware
circuit of the relay selection, drivers, etc. such as, when
serial port input O (**2,1) NO.2 relay pull power; NO.*2
relay
loss of power disconnection when serial port input O
(**2,0).
3. The serial port controller can also collect the state of
the remote input point, for example, The controller sending
out
I (**4,1) through serial port means the fourth input point
have signal input, The serial port sending out O (**2 , 0)
means
the eleventh the input point have no the signal input
4. The distance between serial port controller and control
host can extend through bus **5, the longest network reach
***0
meters;
5. The single serial port control can independently control
the ON and OFF of **-channel relay (or transistor), can
also
collect *6 input point states. Through the address coding,
under the circumstances of one second delay's permission,
a
serial port up to address and control **5 serial ports
controller, constitute a large system composed of ***0 input
points
and ***0 output points.
6. Supplying serial port communication protocol and VB
communication source procedure, Presenting VB demo program of
operating the controller through RS**2 serial port or on
behalf of the development of special procedures.
4. Performance the parameters
1. JMDM**8DIOMR/MT
1) the Working power:
JMDM**8DIOMR: AC*2V or DC *2V ~ *5V;
JMDM**8DIOMT: AC 9V, peripheral drive power: AC *2V or
*4v.
2) Master chip: high performance the PC;
3) Program and data storage: *4K program storage also can use
to save data, the data will not lost after power failure;
4) Input: **-channel Opto-isolated digital NPN type input, the
input current is *0milliampere, 2 of them can be used
for
the interrupt source to count;
5) Output:
JMDM**8DIOMR: **-channel Opto-isolated relay output, the
output voltage is 0 ~ **0V, the maximum output current is 5A,
and
the output status can be read back;
JMDM**8DIOMT: **-channel Opto-isolated transistor output, Open
collector output form, and the output voltage is
*4/*2V,
the maximum output current is 1A, and output status can be
read back.
6) System stability: using Opto-isolated, enable the internal
watchdog and strict high frequency filter
characteristics,
the start-up time since Crashes in less than one second.
7) Interface: a standard RS**2 serial communication interface
(anti**5KV static shock), can direct peripheral communication
with computer and text display; can download procedure
through RS**2 interface directly, no need burner, convenient to
the
procedure modify and upgrade;
8) Working status indicator light: two LED light. LED light
and DIP switch is multiplexed, also can use to set two
parameters
9) PCB size: **5mm * **0mm;
2. JMDM***0DIOV2
1) Working power: *2V or *4V, customized according to the
customers requirement, AC and DC universal, the peripheral
drive
power using *4/*2V DC;
2) Master chip: high frequency the PC;
3) Procedure storage space: *2K (use *4K if there are special
requirement);
4) Data storage space: *6K (use *2K if there are special
requirement), saving data, the data will not lost after
power
failure;
5) Input: **-channel Opto-isolated digital NPN input type.
Input current is *0 milliampere; two of them can use
for
interrupt source to count;
6) Output:
*-channel Opto-isolated digital output, *-channel output type
can customize according to the customers requirement,
divided into *-channel relay output and mixed output;
*-channel relay output: it is the normally open relay output
forms; withstanding the maximum working current is 5A
and
the maximum voltage is **0V, the relay is divided into *2V and
*4V, Determined according to customer needs;
Mixing output: there are *-channel relay outputs;
*-channel transistor outputs, open-collector output form,
output
voltage is *4/*2V, the maximum output current is 4A, output
status can be read back.
7) The points of input and output can customize.
8) System stability:
Using Opto-isolated, enabled the internal watchdog and strict
high frequency filter characteristics enabling the
system
working stable and reliable, the start-up time since crashed
in less than one second.
9) Interface: a standard RS**2 serial communication interface
(anti**5KV static and shock), can direct peripheral
communication with computer and text display; can download
procedure through RS**2 interface directly, no need
burner,
convenient to the procedure modify and upgrade;
*0) Working status indicator: one LED light to display, there
is a DIP switch which can set procedure status or
procedure
parameter according to the procedure demands;
*1) Shell with screws or rail mounting, integrated compact
design.
Shell size: L * W * H: **6mm * *0mm * *0mm;
The Internal control panel size: L * W * H: **2mm * *6mm *
*8mm;
5, the Use
1. Used for a variety of distributed control system;
Used for a variety of remote monitoring system;
3. Used for the bulb light control of the buildings,
advertising and so on, Power plant control, automation workshop
of
large and medium-sized control project;
4 Used for remote IO module;
5 Available for the computer to the control a variety of
peripheral equipment.
