详情
Washing and
drying:
■
The glasses will be washed and dried
in this machine (be able to washing on ∕ off line LOW-E
glass)
■
The washing machine is made
bySUS**4 stainless steel and brass and the door is made by
transparent tempered glass. The operator can monitor the operation
of brushes, rubber rollers, water nozzle, and wind knife outside
the machine.
■-There are have three pairs wheeled roller
brushes (be able to wash LOW-E glass and imports high-temperature
heat-resisting wire). Also it cooperates with high pressure water
sprayer to wash.
■- Automatically distinguish the membrane of the
reflective glass and LOW-E glass.
■
Two water tank cleaners have two
water heaters. They are can be used when the temperature below 7
℃.
Water tank have two water filters to
achieve the circulating water’s clean degree. (The heater’s
temperature is usually *0℃)
■
The blower have wind filters and wind
heaters, achieving better wind cleanness and drying effects. They
are also be used when the temperature below 7 ℃.(The
heater’s temperature is usually *0℃)
■
The drying room uses roller wheel
driving system, in order to make no extrusion trace of the
reflective glass or LOW-E glass’s surface, preventing removing of
coating phenomenon occurrence.
■
According to different glass
thickness, the angle of wind knife can automatic adjust from
*5°to *0°, achieving
the drying effect.
■
Roller brushes are droved by 6
electrical motors and the use of rubber sealing strip can avoid the
high-pressure water spill out.
■
High pressure is *0HP wind knife
blower be able to drying the water in glasses and don’t leave any
trace.
■
Blower, pump, and roller brush only
working in transmission. Save power.
