详情
1) Product Introduction
"Dunba
Nano Fuel-saving & maintaining Fluid for large vehicle" a
fuel-saving environmental friendly multi-functional lubricant
additives made by 2 Nano materials with anti-wear and self-repair
functions, produced by technical equipment with our own
intellectual property rights (Patent No. ZL***********9.1) and new
scientific and technological achievement.
2)Nine functions
Fuelsaving:Fuel
economy, engine oil saving,5%**5% oil consumption saved;
Improve
efficiency:Significantly improve
the efficiency of mechanical transmission, increase the effective
output power, and improve carrying capacity the
vehicle;
Anti-wear:*0%**0% reductions in engine
wear and tear, still can provide strong anti-wear protection under
lubrication system failure and no engine oil
condition.
Self-repair:Dynamically
repair wear and tear, engine life is extended **3
times;
Fast start—Strong lubrication performance,
can effectively reduce the friction coefficient, improve
the initial rotation
speed;
Power
strengthening:restore
the engine cylinder pressure. Power increased by
5%**5%;
Noise reduction:effectively
reduce engine noise and vibration；
Corrosion
prevention:prevent
friction parts from corrosive pitting.
Environmentally friendly:
improve engine oil burning, blue
smoke and other conditions, to reduce exhaust particles by *0%**0% and smoke
emissions by *0%.
3) Four
Major Features
Fast:engine
working environment improved in *5 minutes, noise and vibration
reduced, and power enhanced.
Powerful:triple
protection including inner reinforced, surface repaired and outer
anti-wear by Nano-particles.
Environmental
Friendly:reduce
exhaust particles and smoke emissions.
No side effects: suitable for
long-term use of various vehicles, without any adverse effects or
side effects.
4)TwoMajorBreakthroughs
Self-repair:Nano
particle repairs the wear & scuffing surface automatically,
then fundamentally realizing the engine
maintenance;
Multi-functional: fuel-saving,
anti-wear, self-repair and maintaining
simultaneously.
5) Product Application
This
product can be easily and stably dispersed in all kinds of
lubricants, suitable for various lubricant systems of large
vehicles, such as passenger cars, trucks and construction vehicles
etc.. For those badly worn
vehicles run for many years will have better anti-wear and repair
effect.
6)
Usage methods
After engine oil change, add the product
to engine oil tank, keep the engine idling for around two minutes;
or mix the product with engine oil evenly in advance, then add
mixed product to engine oil tank. Normal usage about 2.5% of
the total lubricating oil, in other words, for large vehicle please
mix *0 liters of lubricating oil with one bottle (**0
grams).
This product can also be added into gear box, mixed with gear
oil at 2.5% ratio.
7)Notice
1) If because of piston ring breaking, engine oil leakage due
to valve oil seal becoming oil , and other reasons which result to
serious engine oil burning, blue smoke discharge and other fault
phenomenon, then these are not included in repairing scope of this
product. We suggest customers repairing your vehicles, after that
use this product.
2) If you haven’t been cleaning the inside of engine for long
time, you should clean it before using this product.
3) Noninflammable, in explosive, in corrosive;
4) Don’t drink and avoid long time skin
contact;
5) Protect from impurity and water;
6) Keep in normal temperature and avoid sunlight.
Your
question: What will nano antifriction additive do for my
engines?
Answer: Dunba
Nano engine oil treatment is prepared by nanoparticles copper-based
technology. It is an advance technology all over the world untill
now.
“Dunba”
fluid is based on lubricant as carrier. Lubricant brings it on the
surface of friction parts, the nano particles treat the metal
surface on the condition of high temperature and pressure, thus
“Dunba” nano particles, metallics and other friction materials
combine and harden, forming anti-wear and extreme pressure,
self-repair layer. After this process, “Dunba” particles become one
part of metal molecular, give scuffing surface triple protection
including inner reinforcement, surface repair, and outer wear
proof. This is the substance of “Dunba”
technology.
With the
protection of “Dunba” product, friction surface is nearly under
zero wear, so the engine vibration declines, noise reduces, and
engine oil burning and blue smoke disappear, then whole efficiency
is improved, such as service life is prolonged, power is
strengthened, oil consumption is reduced, oil dirt and carbon black
is cleaned, harmful gas emission decreases and so
on.
So Dunba
could protect the engine with nine functions as
follow:
Fuel
economy
Engine
protection
Anti-wear
Self-repairing
Fast
start
Power
strengthening
Noise
reduction
Corrosion
prevention
Environmentally
friendly
Your question: Have you done any
testing as to the effectiveness of this
treatment?
Answers: Yes, many, such as CAS TEST
REPORT, customer usage report
