Structural Silicone glazing systems are integral with the design of
todays modern multi storey corporate buildings and Adhere’s **5ST
has become an essential component in these systems. Our **5ST has
been developed for use as the spacer element between the insulated
glass unit and the frame during structural glazing fabrication
where the primary bond is silicone adhesive. **5ST Product
Benefits: 1. Compatible with structural silicone adhesives (tested
and approved by major manufacturers.) 2. Low thermal conductivity
3. Quick, clean and convenient to use. 4. No waste 5. Available in
a range of size. Application Guide: All contact surfaces must be
clean, dry, smooth and free of grease and contamination. Adhesion
is very quick and increases over *4 hours, therefore position tape
as accurately as possible and reposition very quickly if necessary.
Credentials:- **5ST has been approved as compactible by major
silicone adhesive manufacturers such as - Dow and Sika. Storage
Material should be stored in original packaging at *0deg C/ *5deg *
@********************ty max. Sizes A high density vinyl foam is
used with a high performance acrylic adhesive coated both sides
giving longevity in application. A blue plastic release liner is
used for easy removal, 3mm, 6mm, 8mm and 9.5mm thickness are
available in any width from 6mm up to **0mm.
