ORBITA Hotel Deposit Safety Box with high quality

详情

hotel safes
laptop Hotel safes
electronic hotel safe ,digital hotel safe with audit trail
-code hidden function
CE&FCC

ORBITA electronic hotel safe box with audit trail function for option (3 methods for openning) 

Main Features:

1. Size: **0H × **0L × **0Dmm Netweight:*3.*0kgs 

2. LCD display with LED screen       

3. Opening: Two sets of password operation— *-digit guest password/ *-digit master password, bolt and override key

4. Thickness:door*5mm,wall*2mm     

5. Packing size:**5***0***0mm

6. 4AA #5 battery, low electricity cost

7. Inner carpet

8. Fixing holes at bottom and back with screws

9. Auto secure mode

*0. Can contain laptop

*1. Audit trail function for option

Manual:

1)        Double codes system: personal code (*-digits), master code (*-digits).

Factory settings: personal code: “***4”; master code: “*****8”.

2)       Opening

First opening: install 4 AA batteries into the external battery case, plug in the outlet on the faceplate, input factory setting personal code or master code, when press the button there will be a beep. The LED displayer will show “open” when the code is correct, otherwise, it will show “E-code”. After opening, it will show “opened” for 4 seconds, you can pull the handle.

Remove the batteries from the external battery case to the battery case on the back of the door, you can use the safe without the external power supply now. 

3)        Close the door:

1.if you press “ LOCK” within *0 minutes after open the door, then “CLOSED”, and show the former personal code. You can use the same personal code as last time.

2.if you press “ LOCK” after opened the door *0 minutes or more, or you opened the door by master code, the displayer will show “E-CODE”, you can not close the door, you should input personal code (*-digits) and press “lock” key, the displayer will show “CLOSE”; when the door closed it will show “CLOSED”, then show the codes.

4)        Code setting

1. Change master code:

under opening position, input original manage code and press “lock” , when the displayer shows ''NEU”, you can input a new master code;  then press “lock”; after it shows “AGAIN”, input the new master code one more time and press “lock” again, if it succeed the displayer will show “DONED”, indicates the master code has been changed.

2. Change personal code:

input 4 digit personal code when close the door, press “lock” , the displayer will show “CLOSE”, then “CLOSED”, and then the new personal code, indicates the personal code has been changed.

5)        Emergency opening:

If forget personal code or other reasons make the safe can’ t be opened, you can use emergency key or override master code to open the door.

6)        Code hidden function:

press “rest” two times, then press “lock”, it will come into hidden function, when you  input the codes, it only show “” on the displayer.

7)        Cautions:

1. Hold: if input incorrect code 3 times, the safe will be held for *5 minutes, during this period, it will no response press any key, and show “Hold+digit”, the digit is the holding time. After *5 minutes, it will recover to normal situation.

1. Low voltage: when it lowers than 5V, whether open or close, it will show “LO-BAT” on the displayer.
2.  “rest”  is also a deletion key, press one time will delete one digit.