详情
Air Duct Heater is mainly used to heat up the air in the
airduct,can be classified into three types by high
temperature,medium temperature,low temperature.The common ground on
the structure is adopting steel plate to support the heating
tube,in the purpose of decrease the shake of the heating tube when
the fan stops.overtemperature controller is installed in the
Junction Box.The low temperature type air duct heater can be
directly installed on the airduct,Due to the differences from the
structure,the medium temperature type and high temperature type
electric air heater has a **0mm thick thermal insulation material
layer between the duct exine and the Junction Box clamp,not only to
decrease the whole duct external heat dissipation,but also bring
down the temperature in the junction box.
Characteristics
1.Heating tube adopts outer coiled ripple-type SS belt,which
enlarges the heat dissipation area,thus,it greatly improves the
Heat exchange efficiency.
2.Professional design,low wind resistance,uniform heating,no high
temperature or low temperature blind angle.
3.Duplex protection,good safety performance.Temperature controller
and fuse protector are installed,which can be used for controlling
the heater operates normally under the condition of overtemperature
and without wind,thus,to guarantee Not a single miss in a ten
thousand times.
