Sodium Lignosulphonate

详情

products introduction:

Sodium Lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high ,adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from The sodium lignosulphonate and Naphthalin-Group High-Efficiency Water Reducer .The sodium Lignosulphonate is fit for apply to building project, dam project, thruway project etc.

Specification
Appearance: Yellow(light brown) powder
Water-reducing rate: ***2 %
Moisture: Max 7.0 %
Secrete water lead than: Max *5 %
PH value: 9 to *1
Calcium magnesium content: Max 1.0 %
Reducing sugar content: Max 4 %
Air content: Max 4 %
Water-insoluble substance: Max 1.5 %
Inorganic salts(NaSO4): Max 5.0 %
     
Main performance
1,Can reduce *0% of water consumption at least ;
2, can improve mixture of the concrete;
3, Compression strength improves by more than *5% equally on ***8 days;
4, Can reduce the initial stage of the cement heat of hydration by a large margin;
5, Have no function of corroding on the reinforcing bar.

Using methods :

1. 0.**0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ;
2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly;
3. the result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing;

Notice :

1. Strict control to avoid excessive dosage;
2. When the temperature lowers under 5DEG.C,common concrete projects are not
suitable using the chemical additive independently.
3. Experiment to make sure the dosage before use.

Packing & storage & transportation :

1.packing :It has lastic pellicle inside and is exteriorly packed with plastic woven bag with *5kg net weight per bag.
2.Storage :It shall be stored in a waterproof, rainproof place to avoid agglomeration. If there is agglomeration,smashing it or dissolving it will not affect using effect.The product is harmless and does not deteriorate in long term. It's not a flammable and explosive substance.
3. Transportation : It's suitable for both truck transportation and railay transportaion without any limit of remnant cargo or full truck.