详情
2.
SPECIFICATION AND FEATURES OF THE *0T HYDRAULIC PULTRUSION
MACHINE
*0T
pultrusion production line is controlled by PLC，it
is a continues and automatically line includes the hydraulic
reciprocate
traction, pneumatic cutting etc. The production line is suitable
for continues making the products like rod, pipe, angle-steel and
frame etc.
l Specification:
Ø Power:
*5kw;
Ø Traction Power:
**0kN;
Ø Traction
Speed:
0.1~1m/min；
Ø Clamping Range:
**0mm×**0mm（W×H）；
Ø Circulated Cooling
Water:
***0L/H;
(MIN Hydraulic
Pressure is 1.5bar )
Ø Compressed Air:
*0L/Min
(0.4~0.5Mpa)
l EquipmentFeatures：
Ø The
high-precision and dual-display instrument is adopted for
temperature
control.
Ø The
digital display for traction speed
Ø The
sealing parts for hydraulic vessel are imported. And the
hydraulic
system parts
are imported also.
Ø Oil
temperature alarm, oil level alarm and oil heater can be
optioned.
Ø Multi-ways
for your selection for hydraulic traction device. The
traction
speed can be
adjusted variably.
Ø Using
thepneumatic round cutter
forcutting,
pressing and tracking.
Pultrusion is a manufacturing process for
producing continuous lengths of reinforced polymer structural
shapes with constant cross-sections. Raw materials are a liquid
resin mixture (containing resin, fillers and specialized additives)
and flexible textile reinforcing fibers. The reinforcement
materials are in continuous forms such as rolls of fiberglass mat
and doffs of fiberglass roving. As the reinforcements are saturated
with the resin mixture ("wet-out") in the resin bath and pulled
through the die, the gelation, or hardening, of the resin is
initiated by the heat from the die and a rigid, cured profile is
formed that corresponds to the shape of the die. While pultrusion
machine design varies with part geometry, the basic pultrusion
process concept is described in the schematic shown
below.
