The TEXHA company presents one of their brand new products – the
Alternative System for Layers Housing. It’s produced on
the base of the TEXHA’s regular cage for layers housing according
to European standards, which is well-known in poultry
world
and appreciated by the poultry specialists. The system was created
for housing of commercial layers according to the
European
standards.
The system has all the advantages of regular cage: it provides the
optimal conditions for poultry housing, significantly
saves
your money and has long exploitation terms. The main distinction of
the system is the bigger space, which is provided for
poultry
pasture and includes the space under the system (the area from the
floor to the first tier).
Why it is so important? The system does a significant contribution
into increasing the quality
of your product. The wide space for pasture guarantees health of
the poultry and, correspondently,
the higher rate of egg-laying qualities and quality of
eggs.
How TEXHA provides the comfortable poultry housing in the system?
The doors of the system
may be opened upwards. The layers are able to go out of the system
through the open door
and walk on the area above the egg collection tray, under the
system, or move from tier to
tier. That’s why the pasture area increases.
Taking into consideration that the layers may go out on the floor
of poultry house, the floor
area is added to the usable area.
In accordance with your requirements, the niche under the battery
may be closed.
What does the system provide?
1. Optimal conditions for poultry
housing
The system is equipped with 3 roosts, which help birds to feel free
and protects them
from emotional stress because of the closed space
The nest with a shutter lets the birds feel comfortable
The incline of the floor is 7°. It enables free rolling down of
eggs onto the egg-gathering
belt. The nests are located close to egg-gathering tray, what helps
to reduce the incision
on eggs while their rolling down. The protective shield made from
galvanized steel preserves
eggs from pecking and prevents falling of manure into egg-gathering
tray
Using of solid diametrical galvanized partitions with perforation
makes the system
firm, improves the micro-climate in the poultry house, provides
good air conditioning
The minimal using of plastic elements improves the hygiene and
enables washing with
hot water under the pressure
2. Exploitation
period
The system is made of high-quality steel
covered with 1 class zink
The floor mesh is very firm
The steel file-hard sprockets
are used in the drives
The necessary firmness reserve
has been provided
3. Low exploitation
expenses
The energy-saving technologies
are used in the system. The electrical
devices power is 4.8 KW in each
battery
The lift egg-gathering system
saves energy and labor expenses
The system of planned-prophylactic
repairs has been created
FEEDING SYSTEM
The equipment has automatic feeding system and chain feed
distribution.
Being installed inside of the system it enables doubling of feeding
front.
Feeding System Components
- Hopper
- Feed distribution chains
- Feed chute
- Feed distribution drive
- Turner
Feeding System Advantages
- Effectiveness and durability
- Easy installing
- Feed loss reducing
- Perfect solution for any poultry house
- Grooved shiny hopper surface does not allow feed
overheating
- Feed distribution productivity – **6 tons per hour
DRINKING SYSTEM
Drinking system in the equipment is simple, reliable, and
effective.
Drinking System Components
- Water treatment unit: water meter, medicator, two filters
for
mechanical water cleaning, manometers, stop valves
- Water distribution system
- Drinking lines
Each system is equipped with three drinking bowls. It provides
birds
with necessary amount of water. The pressure control may be
installed into drinking system if required.
MANURE EVACUATION
SYSTEM
The manure evacuation system enables fast and qualitative manure
removing. The system’s drive is powerful, simple,
reliable,
and durable.
The drive system is used for driving of manure evacuation
belts.
It has built-up construction and consists of sides of 2 mm
width
and driving drums, which are installed on the special bearing
with
spherical circular surface. The driving of drums is done by
motorreductor
(2 drums per 1 motor-reductor).
The take-up station controls and tightens the manure evacuation
belts.
The framework of the stations is dismountable. It is made of
galvanized
steel. The belt is tightened by shaft with a spiral screw by means
of the
chain through the ratchet mechanism. The belts wart may be
removed
by means of the screws located on the brackets of shaft’s
fastenings.
The shaft and scrapers enable inside cleaning of the
belt.
The longitudinal manure evacuation belts are made of
solid
polypropylene and installed under each tier. They are cleaned by
scrapers made from wear-resistant material. The system
provides
fast and qualitative manure evacuation onto diametrical
transporter.
Manure is removed from the poultry house by inclined transporter
and loaded onto vehicle. The air humidity while manure
evacuation
is up to *5 %. It helps easy evacuation of manure and immediate
using it as fertilizer. Timely manure evacuation and right
manure
consistence don’t let the excessive ammonia and water evaporation.
It contributes into favorable climate in the poultry house.
EGG GATHERING
SYSTEM
TEXHA offers using of lift or elevator egg gathering systems. The
systems work in reliable, careful, and accurate way. The
other
advantages of the systems are: labor reducing while
gathering
and sorting of eggs, adherence to the specifications, birds’
stress
reducing.
Components of Lift Egg Gathering System
– Longitudinal belt transporter
– Diametrical transporter with lift mechanism
– Inclined egg gathering transporter and roll-table
The elevator egg gathering system includes universal
elevator
for egg gathering and laying onto egg transporting system.
One
elevator is installed at each battery. It can be included into
general
line of eggs transporting.
Technical Characteristics of the
System for Layers Housing
Number of tiers 3
Width of the system ***0 mm (6 ft)
Depth of the system ***4 mm (5'3")
Distance between tiers **0 mm (2'3")
Facade height **3 mm (1'*1")
Height inside the system **4 mm (1'7")
System area 2.*5 m2 (*1.*9 sq ft)
Feeding tray length ***0 mm (*0 ft)
Floor mesh
Incline 7°
Cell size *5x*0 mm (0.*8 x 1.*7 in)
Wire diameter 2 mm (0.*8 in)
Birds’ quantity in the system depends on the poultry house
parameters
and meets the European standards.
Technical Characteristics of
Equipment
Parameters Numerical Value
Compartment size ***0x***4 mm (6 x 5'3")
Module height ***0 mm (8'7")
Total area for layers housing ***4.*8 m2 (*1 **9 sq ft)
Effective area for layers housing ***3.*4 m2 (*6 **5 sq
ft)
Total mesh floor area ***7.*1 m2 (*8 **3 sq ft)
Number of batteries 7
Number of tiers 3
Number of partitions *8
Number of compartments ***8
