Sell EPE and XPE Foam thermal Insulation

Unlike the conventional insulation material, such as glass fiber, this new insulation material does not cause any harm to human health and environment.

 specification

1.made from Aluminum foil or Aluminized film with EPE or XPE foam such as*-

al foil/epe or xpe/al foil

al /woven cloth/epe or xpe/al foil

al foil with coating /epe or xpe/al foil

and so on,we can produce each type you need.

 2.you can choose the thickness(4mm,5mm,6mm or 8mm and so on) and the color (green ,white ,blue or red ,just you like and you need)of the foam

 3.the roll size can be made depending on your need.

Traditional size is 1.2**0M/roll,or 1.*2**8.1M/roll.

 Product Benefits

1. No odor and toxicity, environmentally-friendly

2. Light, soft, dust free, fire retardant and easy to install

3. Provides more uniform temperatures throughout the space, There is less temperature gradient both vertically(between ankle height and head height) and horizontally from exterior walls, ceilings and widows to the interior walls, thus producing a more comfortable occupant environment when outside temperatures are extremely cold or hot.                          

4. Has minimal recurring expense , Unlike heating and cooling equipment, insulation is permanent and does not require maintenance upkeep, or adjustment.                                                     

5. Many forms of thermal insulations also absorb noise and vibration , both coming from the outside and from other rooms inside the building , thus producing a more comfortable occupant environment    

Guidelines for all sun stop-foil insulation  

1,Sun stop foil works best when there is 3/4” air space on each side of the insulation(larger air space is fine but a smaller one reduces its thermal effectiveness)

2, Sun stop foil should always be installed on the inside of the structure

3,  Sun stop foil will not cure existing problems .Leaking roofs, rot or mold situations or other moisture or structural problems should be corrected before insulation

4, Any deteriorated wiring should be replaced prior to installing sun stop foil

5, Sun stop foil should be least 3”from any heat producing fixtures , chimneys, blowers, etc.

Never install sun stop foil directly above lighting or other heat producing devices 

6, Always turn off all electricity in the area when installing sun stop foil