离岸价格
获取最新报价( Negotiable )
|Minimum Order
位置:
China
最小订单价格:
-
最小订单:
1 Unit
包装细节:
wooden pallet package
交货时间:
within 45 days after received T/T payment or L/C
供应能力:
45 Unit per Year
付款方式:
L/C, T/T
联系人 Ms. sofia
Pingsheng industrail east, Foshan, Guangdong
Solutions for fire protection used brass parts
Combined melting furnace and holding furnace
Introduction and structure
Melting furnace and holding furnace are tied together. No smoke furnace itself while melting. Auto constant temp control unit is available. Widely used in the field of brass, copper alloy products.
Both furnace connect through bottom, raw material melted down, liquid can be flowed to holding furnace chamber after component of liquid met special requirement. We this design structure can reduce smoke, loss of zinc because of oxidizing. Energy consumption is less.
The **0kw,*5kw main frequency cored iduction furnace is composed by furnace body, inductor, cabinet, the inductor is installed under furnace body, include iron core, copper loop, coil, water jacket and so on.
**0kw melting furnace *5kw holding furnace
Specification Specification
Model: **0 Model: **0
Power: **0kw Power: *5kw
Rated voltage: **0v Rated voltage: **0v
Melting rate: **0kg/h Output stream: 2
Working frequency: *0hz Working frequency: *0hz
Capacity: 1.6ton Capacity: 2.5ton
Inductor: U type, single coil Inductor: U type, single coil
Quantity: 1 set Quantity: 1 set
Introduction and structure
The casting machine is composed by pedestal, electronic motor, speed reducer, gears, pulling roller, screw down device, speed control system.
Die casting machine
Specification:
Model: SYO**0
Speed: **0.**5m/s
Casting diameter: ***0mm
Quantity: 2set
Introduction and structure
This cutting machine is suitable for fix length cutting(rod,pipe). It is made up of pneumatic system. Automatic cutting and unloading is available. The saw is welded with hard alloy,can bear high temp. The saw can move along the guide rail. After finish cutting, the saw will be pushed back by air cylinder.
Pneumatic cutting machine
Specification:
Model: Q*0
Cutting size: Φ***0mm
Speed: *0s/pcs
Power: 3kw
Working frequency: *0hz
Driver: pneumatic unit
Air pressure: **1 Mpa
Quantity: 2set
Intruction:
Using together with peeling machine, for stripping the head of brass/copper rod,pipe before peeling.
Heading machine
Specification:
Model: CZ-C
Specification: Φ*0
Heading diameter: Φ8**0mm
Working length: *****0mm
Quantity of reamer: 4
Motor power: 4 kw
Quantity: 1 set
Application: for processing the oxidized surface of brass rod
Peeling machine
Main parameters:
Model: LG***0
Specification: below Φ45mm
Working length: ***4m
Motor: *5kw
Hexagon,Square straightening machine (horizontal and vertical)
Specification:
Model: YT**2C
Straightening size: S****0mm
Precision: 0.2mm/**0mm
Motor power: 5.5*5.5 kw
Quantity: 1 set
Machining processing:
brass billet slice cutting
hot forging press
CNC lathe
Finished products: