详情
Combined wire drawing machine S2/**0+W***3/**0
This combined drawing machine is designed for wire coil with big
diameter, prolong drawing process, the biggest wire inlet diameter
could be *0mm,S2/**0 straight wire drawing machine is to use hard
tooth speed reducer, the manufacture technology is the same as
straight wire drawing machine. The speed reducer gear of W***3/**0
wet drawing machine is **-modulus herringbone gear, the bevel gear
of take-up box is **-modulus, speed ratio 1:1.
The function of man-machine interaction, motor temperature protect,
meter calculation, meter alarm, failure display is designed for
this machine. The control type is PLC, with high efficiency, easy
operation. highly automatic and wide wire diameter. The investment
capital and maintenance cost of this machine is low, but widely
applicable for drawing of big diameter wire rope, big diameter
spring wire.
Parameter for combined drawing machine S2/**0 + W***3/**0
| Items |
Unit |
Data |
| Maximum diameter of inlet wire |
mm |
Ф*0 |
| Minimum diameter of outlet wire |
mm |
Ф4.*-Ф2.3 |
| Drawing line speed |
m/min |
******0 |
| Loading capacity |
Mpa |
≤***0 |
| Total compression rate |
% |
****5 |
| Average compression rate |
% |
****8 |
| Motor power |
kw |
*5×2***0 |
| Size |
mm |
****0×***0×***0 |
(2) Combined wire drawing machine S5/**0+V**0
This combined drawing machine is designed for big coil weight. The
features are: continuous drawing, big take- up coil weight, with
the function of man- machine interaction motor temperature protect,
meter calculation, meter alarm, failure display. The control type
is PLC, with high efficiency, easy operation, highly automatic and
wide wire diameter.
Parameter for combined drawing machine S5/**0 + V**0
| Items |
Unit |
Data |
| Maximum diameter of inlet wire |
mm |
Ф**-Ф8 |
| Minimum diameter of outlet wire |
mm |
Ф5.*-Ф4 |
| Drawing line speed |
m/min |
******0 |
| Loading capacity |
Mpa |
≤***0 |
| Total compression rate |
% |
*5 |
| Average compression rate |
% |
*0 |
| Motor power |
kw |
****5 |
| Size |
mm |
****0×***0×***0 |
