HGM***0/***0 applies
for microprocessor technique which can carry out precision measure,
constant value adjustment, timing and threshold setting and etc.
Most of parameters can be adjusted via panel of controller while
all parameters also can be set, adjusted and monitored via PC by
USB port or RS**5 port. It can be widely used in all types of
generator automatic control system for its compact structure,
advanced circuits, simple connections and high
reliability. It
has functions of controlling genset start/stop automatic, data
measuring, “remote controlling, remote measuring, remote
communication” and protection alarm. The controller equip with
bigger LCD display, Chinese and English option display. It is easy
operation and reliable running.
Performance and Characteristics
HGM7X*0, Auto Start Module, controls genset to start or stop
automatic by remote start signal.
HGM7X*0, Auto Main Failure, update based on HGM7X*0. Special for
automatic system made of 1 gens plus 1 mains.
Main characteristics
♦ X*2 ARM CPU used, high integration of hardware and more
reliable;
♦ **2x*4 LCD with backlit, Chinese, English or other languages
display, gentle press button for operation;
♦ Acrylic materials used for protecting LCD screen, wear and
scratch resistant performance is better;
♦ Silica gel panel and push buttons used more strong ability of
adapting high-low temperature;
♦ Has RS**5 communication port and “remote controlling, remote
measuring, remote communication” functions by the ModBus protocol.
(which controller has RS**5 port only);
♦ With SMS (Short Message Service) function. When genset is
alarming, controller can send SMS automatic to max. 5 telephone
numbers. User can control or check genets by sending Short Message
(which controller has GSM port only);
♦ Has CANBUS port and can communicate with J***9 genset (which
controller has CANBUS port only);
♦ Suitable for various system of *-phase *-wires, *-phase *-wires,
*-phase *-wires, and *-phase *-wire (**0/**0v) power,
*0/*0HZ;
♦ Senses and shows gens or mains’ *-phase voltage, current, and
power, frequency.
♦ For Mains, controller has over and under voltage, over and under
frequency, loss and anti-phase functions; For gens, has over and
under voltage, over and under frequency, loss and anti-phase, over
and anti-power, over current functions;
♦ 3 fixed sensors (temperature, oil pressure and
level);
♦ 2 configurable sensors can be set as sensor of temperature or
fuel level (HGM*2X0 has only);
♦ Precision measure and display parameters about
Engine,
♦ Control protection, Start & Stop genset, ATS(Auto Transfer
Switch) control automatic, and has complete failure protection
function;
♦ All output ports are relay-out;
♦ User can modify parameters and store them in internal FLASH
memory; the parameters setting cannot be missed even without power;
most parameters can be set via panel of controller; and all
parameters can be set via PC, which connected with USB or
RS**5;
♦ More kind of curves of temperature, pressure, fuel level can be
used directly and users can define the sensor curve by themselves
also;
♦ More successful start conditions (speed sensor, oil pressure,
generator frequency) are optional;
♦ Widely power supply range (8~*5VDC), accommodating to different
battery voltage starting environments;
♦ HGM***0 series have functions of event logs, real-time clock,
start & stop generator timing (can be set as start genset once
a day/weekly/monthly whether with load or not);
♦ Can be used in pumping sets, and using as indicating meters also
(indicating and alarming only, outputs is
inactive);
♦ Have timing maintenance function. Actions (warning only or
alarming stop) can be set when maintenance time
up;
♦ All parameters used digital modulation and instead of analog
modulation which using conventional electronic potentiometer. More
reliability and stability;
♦ Modular design, anti-flaming ABS plastic shell, inserted type
connection terminals and built-in mounting. Structure compact with
easy mounting.
