详情
WEATHER PROOF MATT TW**2 Suitable
Surfaces
Exterior surfaces including concrete, brick, cement mortar,
cement sheet.
Surface Preparation
Surfaces to be painted must be solid, clean and dry. Allow
concrete, cement render and mortar to cure for *8 days or until the
alkalinity drops below pH*0 before painting. Remove all dirt, dust,
grease and grime. Prime bare concrete and cement render with
Taubmans primer.
Stirring
Stir thoroughly before use. To aid in color consistency do not
apply different coating batch numbers to the same surface. Box
pails for final coat, if more than one coat is required.
Thinning
Thinning is not recommended. In hot weather, or application by
spray, thinning with water up to 5% may aid application.
Application
This product may be applied by brush, roller or spray. Apply 2
full finish coats.
Coverage
Up to *5 square meters per litre, depending on the surface
porosity, method of applications and coating sequence.
Temperature
Avoid application when surface temperature is below
*0? or above *5? and
particularly in dry, windy or wet conditions.
Specification
GB/T ***5 GB****8
Shelf Life
*4 months in normal temperature conditions.
Clean Up
Clean all equipment with water, away from drains and
watercourses.
Safety
Keep out of reach of children.
If swallowed: Drink plenty of water and seek medical
advice.
Eye contact: Rinse with water, always seek medical
advice.
Protect our Environment
Do not pour leftover paint down the drain.
A premium exterior acrylic water based flat finish. Taubmans
Weatherproof provides protection against the sun’s harmful UV rays,
mould resistant, easy to apply, and has excellent covering
power.
