详情
FULL AUTOMATIC WASHER
EXTRACTOR
IT IS MANUFACTURED ACCORDING TO THE
*8/*7/EEC MACHINE SECURITY REGULATION, *3/*3/EEC LVD LOW VOLTAGE
REGULATION AND *9/**6/EEC ELECTROMAGNETIC COMPATIBILITY REGULATION
(EMC)
OUTER SURFACE FINISH AND ENTIRE SURFACE
WHICH IS IN CONTACT WITH WATER AND CLOTHES ARE MADE OF AISI **4
(*8/8 CR-NI)GRADE STAINLESS STEEL MATERIAL
THE MACHINE COMPLIES WITH EN ISO ******1
AND EN ISO ******2 STANDARD
THE MACHINE HAS, IN ACCORDANCE WITH
SOILING LEVEL, *5 FIXED AND *0 OPTIONAL PROGRAMS. WHEN THE
APPROPRIATE PROGRAM IS SELECTED; DETERGENT, WATER,ENERGY
CONSUMPTION AND TIME SAVING IS ENSURED.
COMPUTER CONTROLLED TIME/TEMPERATURE
ADJUSTMENT THAT YOU MAY ADJUST THE EXISTING PROGRAMS OR MAKE YOUR
OWN PROGRAMS BY MEANS OF TOUCH SENSITIVE ELECTRONIC CONTROL PANEL
VISUALLY.
MACHINERY RPM IS ENSURED BY MEANS OF
SPEED CONTROL DEVICES.
IT FEATURES SAFETY LOCK TO PREVENT
OPENING OF THE LID WHILE OPERATING THA MACHINE
WHILE OPERATING THE MACHINE, OPERATION
IS AUTOMATICALLY CEASED BY MEANS OF THE RELEVANT SWITCHES IN CASE
OF EXTREME VIBRATION OR THE CLOTHES WASHED OR NOT SUITABLE FOR
SPINNING, THEREBY PREVENTING DAMAGE TO THE MACHINE
TO PREVENT ELECTRIC SHOCK, THE UNIT
FEATURES CLASS I SAFETY
BASED ON THE ENERGY SELECTION IT IS
MANUFACTURED AS STEAM-OPERATED OR ELECTRICITY-OPERATED.
MINIMUM VIBRATION IS ENSURED BY ENHANCED
SPRING AND SHOCK ABSORBER SYSTEM.
WHEN THE MACHINE STARTS RECEIVING WATER
, THE DRUM ALSO START SPINNING. THUS, HOMOGENEOUS DISTRIBUTION OF
WATER AND CHEMICALS WITHIN THE CLOTHES IN THE DRUM IS
SATISFIED.
THANKS TO ERGONOMIC AND LARGE LID,
MACHINE IS MORE EASILY LOADED AND UNLOADED.
ROLLER BEARING , WHERE ALL ROTARY
ASSEMBLIES HAVE BEEN HOUSED, IS MADE OF HIGH QUALITY BALL BEARINGS.
THOSE ARE EQUIPPED WITH SEALING ELEMENTS WHICH ARE MADE OF ‘VITON’.
THANKS TO SPECIALLY DESIGNED PADDING SYSTEM, THE WATER IN THE TANK
NEVER INFILTRATES INTO BEARING HOUSING AND THE LUBRICANT OIL IN
BEARING HOUSING NEVER MIX THE WATERIN THE TANK.
LONG LIFE STAINLESS STEEL HEATING
ELEMENTS. THUS, MAXIMUM CONDUCTIVITY IS ENSURED IN WASH WATER,
ENSURING TIME AND ENERGY SAVING.
MACHINE HAS TSE PRODUCT QUALITY
CERTIFICATE AND CE PRODUCT QUALITY AND SECURITY CERTIFICATE.
WASHER AND DRYER COMBO
MACHINE
THE PRODUCT SOLITARILY CARRIES OUT
WASHING-SPINNING-DRYING OPERATIONS, WHICH CAN BE PERFORMED BY THREE
SEPERATE UNITS. THEREFORE, IT SAVES SPACE AND ENSURES
MATERIAL ADVANTAGE.
WASHING-SPINNING DEVICE ISSETTLE DOWN AT
LOWER PART
DRYING UNIT IS AT THE TOP
THE HEATING SYSTEM IS MANUFACTURED AS
ELECTRICITY-OPERATED.
THE MACHINE HAS READY FOR COATING OF
ELECTROSTATIC POWER PAINT.
THE MAHCINE COMPLIES WITH THE STANDARDS
EN ISO ******1, EN ISO ******4
IT HAS TSE PRODUCT QUALITY CERTIFICATE
AND CE PRODUCT QUALITY AND SECURITY CERTIFICATES
OPTIONAL STAINLESS STEEL EXTERIOR
SURFACE AND COIN-OPERATED MACHINE
WASHING – SPINNING DEVICE
WHOLE SURFACES THAT CONTACTED WITH
WATER, INNER AND OUTER DRUMS ARE MADE FROM STAINLESS STEEL
IT HAS *5 FIXED PROGRAMS BASED ON
DIRTINESS LEVEL OF GARMENTS AND *0 ADDITIONAL PROGRAMS THAT
DESERTED TO USERS CHOICES
IN ACCORDANCE WITH THE USERS DESIRE,
NUMBER OF PROGRAMS COULD BE INCREASED
IN CASE OF MOST SUITABLE PROGRAM IS
CHOSEN, THIS SAVES TIME AND LOWERS DETERGENT, WATER AND POWER
CONSUMPTION
PROGRAMS CAN BE ADJUSTED VISUALLY BY
TOUCHING THE CONTROL PANEL ON THE FRONT PANEL
ROTATION SPEED OF THE MACHINE CAN BE
ADJUSTED VIA SPEED CONTROL UNIT
DRYER DEVICE
THE DRUM AND THE LID ARE MANUFACTURED
FROM STAINLESS STEEL
PROGRAMS CAN BE ADJUSTED VISUALLY BY
TOUCHING THE CONTROL PANEL ON THE FRONT PANEL
THE MACHINE HAS 5 PROGRAMS, IN
ACCORDANCE WITH THE USERS DESIRE, NUMBER OF PROGRAMS COULD BE
INCREASED
