19F No.1 Research & Development Park No.399 Juxian Road, National High-Tech Zone, Ningbo City, Zhejiang Province
现在联系
详情
This freight elevator features safety,advanced technology,
different sizes,high performance, good structure, wide
applications,etc.It is the wise choice for vertical transport of
goods.
1.
Automatic operation:Automatically open the door;automatic
time-lapse closing;manual closing in advance. 2.
Operator operation:The operator can choose the floor and the
freight elevator will open the door automatically when reaching the
station;Automatic registration in the car and automatic response
outside the car; manual closing. 3.
Closing protection:If anyone enters into the elevator while the
door is closing,it will stop closing to open again. 4.
Overload protection:When the elevator is overloaded,the alarm will
ring and the light will on.The elevator will not close the door and
not operate. 5.
Full-load directional operation:when the elevator reaches the
largest load,it will only respond to the instructions
inside. 6.
Energy-saving function:If no one uses the elevator during the
setting time,the illumination and air blower in the car will turn
off automatically and turn on with the instructions. 7.
Nearby standing:During the operation,if the elevator breaks down,it
will stop on the nearby station and open the door
automatically. 8.
Arriving station alarm:When the elevator is going to reach the
destination floor,the alarm will ring to notify the
passengers. 9.
Emergency illumination in the car:When the power of the
illumination is cut off,the emergency illumination will be turned
on. *0.
Automatic base station return:With no calling, the elevator will
return to the appointed base station. *1.
Automatic floor return when energized:The elevator will return to
the floor when energized. *2.
Overspeed protection: *3.
Anti-disturbance:When the elevator load is below the setting and
the instruction inside the car is more than three, then all the
instructions will be cancelled. *4.
VIP service:During VIP service, the elevator will abide the
instruction inside the car in advance to ensure the rapid arriving
of the passengers. *5.
Forced closing:When the opening time is beyond the setting,the
system will ignore the closing protection function temporarily and
close forcedly. *6.
Inner communication:When the elevator breaks down,the people in the
car can communicate with the staff in the generator room or the
detecting room. *7.
Breakdown testing:When the elevator is break down,the system will
analyze the reason automatically for the maintenance
staff. *8.
Repeated closing:When the door is not closed in the setting time
with the closing instruction,the door will open and close
again. *9.
Standing function:When the elevator is not in use,standing floor
can be chosen. *0.
Automatic turning on and off function:The turning on and off can be
set without any inspection. *1.
Operation cancel:When the passenger chooses the wrong floor,he can
cancel it and choose again. *2.
Non-stopping floor setting:The passenger can set the non-stopping
floor according to his need. *3.
Character setting:The character displayed can be set according to
the need. *4.
Calling button diagnosing function:The system will ignore the
floor-choosing instruction when the calling button of this floor is
closed for a long time. *5.
Hibernate function:When the elevator is not in use in the setting
time,the monitor will hibernate to increase the
lifespan. *6.
Intelligent freight elevator
manufactureroperation:When the elevator is in use,the
elevator will choose the best operation mode according to the
passenger number and time.