❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

RTV-2 for plaster statues molds

离岸价格

获取最新报价

6.22 ~ 12.88 / Piece ( Negotiable )

Minimum Order

位置:

最小订单价格:

最小订单:

200 Kilogram

包装细节:

25kg/drum and 200kg/drum

交货时间:

within 3 days after getting payment

供应能力:

8 Kilogram per Day

付款方式:

PayPal, Western Union, L/C, T/T

现在联系

ShenZhen Hong Ye Jie Technology Co., Ltd

China

免费会员

联系人 Ms. JoJo

Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong

现在联系

详情

Description:

HY-635# plaster cast silicone is mainly used for plaster products molds with the advantages of high tear strength, high durability, high temperature resistance, long shelf life, high duplication times etc. It is suitable for small products or fine and precision products which is difficult to demould. This plaster molding silicone is one of the products with the highest use level in the production of many kinds of products, and the shrinkage is even lower than 2‰.The rtv mold making silicone rubber(condensation curing) is generally called two-component room temperature vulcanization type with excellent fluidity and operational performance. Add curing agent of 2%-3% at room temperature, the plaster molding silicone is still operational within 30 minutes,and in 2-5 hours, a high tear silicone elastomers will be obtained with resistance to deformation, high-temperature, acid and alkali, and expansion.

Applications:

This high tear strentgh silicone rubber can be used in making molds for plaster, polyurethane , lighting ornaments, model design, stationery gifts, artifacts replia, PU crafts, and so on.

Plaster Molding Silicone Standard Datasheet:

Model	Appearance	Viscosity　 (cps)	Hardness (A°)	Tensile Strength (Mpa)	Tear Strength (KN/m)	Elongation (%)	Mixing ratio(%)	Operating Time(H)	Curing Time(H)
635	White	≤38000	36±2	≥3.8	≥28	≥360	2~3	0.5~1	2~5

Operation Instruction for rtv-2 plaster moulding material :

　Our product, a flowing liquid with general hardness of 34—38A°after curing process, is in white color. also you can add some dye according to your needs, but you should contact with us first, because some type of dye will affect the silicone property and quality. If customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If requires faster drying rate, more curing agent should be needed; contrarily, if requires slower drying, less curing agent is needed. If all the operation is correct, you will obtain a perfect silicone elastomers for molding. The operation is not difficult, our salesmen can give tailored molding scheme for customers.(every salesmen of Hong ye company is well trained to provide with related technical consultation)

The proportions and reactions of the curing agent and the silicone are listed as follows:

　1. Adding curing agent 1%, the silicone could still be operated within 2.5 hours, and could be demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicone could still be operated within 50 minutes to 1 hour and could be demoulded after 2-3 hours.

　　3. Adding curing agent 3%, the silicone could still be operated within 28 - 30 minutes and could be demoulded after 1.5-2 hours.

　　4. Adding curing agent 4%, the silicone could still be operated within 10 - 15 minutes and could be demoulded after 1 -1.5 hours.

RTV-2 for plaster statues molds

ShenZhen Hong Ye Jie Technology Co., Ltd

详情

Send a direct inquiry to this supplier

至:

我想知道:

RTV-2 for plaster statues molds

ShenZhen Hong Ye Jie Technology Co., Ltd

详情

Send a direct inquiry to this supplier

至:

我想知道:

Get Verified Buyers & Suppliers

Avail Free Consultation