Adopt advanced technology and recipe, which can remove oil and
greasy dirt in a few minutes without disassembling engine parts.
Improve oil property and consumption efficiency. Increase engine
power.
SPEC: **0ml
MEAS. (CM): *1x*8x*8
G. W. (kg): *0.4
DIRECTIONS FOR USE:
1. Check the volume of engine oil before replacing the
oil.
2. Start the engine till normal temperature then stall
it.
3. Add the product into crankcase from the input of engine
oil.
4. Re-start the engine while running idly for 3 minutes to remove
the dirts. If the system has not been cleaned for a long time,
added application or extended cleaned time can be
resorted.
5. Stall the engine to drain out the oil.
6. Replace oil filter and clean the plug. Fill in new engine
oil.
For general cars, 1 container is suitable; As for SUVs, trucks,
tractors, and other larger vehicles, 2 containers should be used;
1/2 container is enough for the motorcycles (less than
**0CC).
FlAMMABLE. Do not spray near heat, sparks, or open flame. Avoid
prolonged exposure to sunlight. Store at temperature below *0º C.
May cause eye and skin irritation. If contacting, immediately flush
with plenty of water. Do not swallow. Keep out of the reach of
children.
